Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
8 About Oregon Scientific ......................................... 8 Outdoor Temperature EU-Declaration of conformity ................................ 8 Model: RMR391P / RMR391PA / FCC Statement ......................................................... 9 RMR391PU USER MANUAL CONTENTS Overview .................................................................. 2 Front view ............................................................. 2 Back view ............................................................. 2 Bottom view .......................................................... 3 Remote sensor ..................................................... 3 Getting started ......................................................... 3 Power supply ......................................................... 3 Remote sensor. ..................................................... 4 Sensor data transmission ..................................... 4 Clock ........................................................................ 5 Clock reception .................................................... 5 Manually set clock ................................................ 5 Alarm ........................................................................ 5 Temperature ............................................................. 6 Projection ................................................................ 6 Backlight ................................................................. 6 Reset ........................................................................ 7 Precautions ............................................................. 7 1 EN OVERVIEW BACK VIEW FRONT VIEW 123456 7 8 1 2 3 4 5 6 7 1. .C / .F: select temperature unit 2. / : increase / decrease value of the setting; 891011 1. SNOOZE / LIGHT: activate snooze alarm; turn on backlight / projector; flip projected image 180. 2. Projector 3. : clock signal reception indicator 4. : adapter disconnected 5. : alarm time is displayed 6. : remote sensor reception indicator 7. : indoor temperature is displayed 8. : daily alarm is ON 9. AM/PM 10. Calendar format 11. +ZONE: time zone offset activate / deactivate clock reception signal 3. ON·PROJECTION·OFF: enable / disable continuous projection 4. : view alarm status; set alarm; activate / deactivate alarm function 5. BACKLIGHT·HI·OFF·LO: enable / disable continuous backlight; select brightness 6. MODE: set clock 7. TEMP: toggle between indoor / outdoor temperature display; initiate auto-toggle 8. RESET: reset unit to default settings 2 EN BOTTOM VIEW GETTING STARTED POWER SUPPLY 2 x CR2032 batteries 2 To insert batteries: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the polarities. 1. Adapter socket 3. Press RESET after each battery change. 2. Battery compartment REMOTE SENSOR LOCATION MEANING Clock area Main unit batteries low Outdoor / indoor temperature area Sensor batteries low 123 1 x adapter: Alternatively, use the adapter supplied to power the unit. For continuous use of projector / backlight, adapter 4 must be installed. 5 Make sure the adapter is not obstructed and is easily accessible to the unit. NOTE The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, 1. LED status indicator 2. Wall mount hole 3. Battery compartment 4. RESET hole: Reset unit to default settings 5. CHANNEL switch: Select channel 1 such as vases, should be placed on the main unit and adapter. To completely disconnect from power, the adapter should be disconnected from the main unit. will appear when power supply is not connected. 3 EN REMOTE SENSOR To set up the remote sensor: 1. Slide open the battery compartment. 2. Slide channel switch to select channel 1. 3. Insert the battery, matching the polarities. 4. Press RESET after each battery change. 5. Close the battery compartment. 6. Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount. The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results. NOTE We recommend that you use alkaline batteries with this product for longer usage and consumer grade lithium batteries in temperatures below freezing. SENSOR DATA TRANSMISSION Outdoor sensor: The main unit will automatically search for the outdoor sensor. The sensor reception icon in the remote sensor area shows the status: ICON DESCRIPTION Main unit is searching for sensor(s) A channel has been found The sensor cannot be found. NOTE If the sensor is not found, check the batteries, obstructions, and remote unit location. For best results: • Place the sensor out of direct sunlight and moisture. • Position the sensor so that it faces the main unit, minimizing obstructions such as doors, walls and furniture. • Place the sensor in a location with a clear view to the sky, away from metallic / electronic objects. • Position the sensor close to the main unit during cold winter months as belo...