Log:
Assessments - 2, GPA: 3.5 ( )

Instruções de Operação RCA, Modelo RP5420

Fabricante : RCA
Arquivo Tamanho: 351.77 kb
Arquivo Nome : 9b08fc98-425c-9a94-7904-66731c50e0ba.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Do not attempt to bypass this safety feature. Caution: The screw fastening power cord at the bottom enclosure is served as a means of power cord strain relief. Do not loosen or throw this screw away! For Your Records In the event that service should be required, you may need the model number. In the space below, record the date and place of purchase: Date of Purchase: Place of Purchase: Service Information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this Guide. Technical Information Product: Clock Radio Brand: RCA Model: RP5420 Electrical Consumption Power Supply: 120V ~ 60Hz Power Consumption: 4 Watts IMPORTER Comercializadora Thomson de Mexico, S.A. de C.V. Alvaro Obregon No. 151. Piso 13. Col. Roma. Delegacion Cuauhtemoc C.P. 06700. Mexico, D.F. Telefono: 52-55-11-020360 RFC: CTM-980723-KS5 The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications without prior notice. The English version serves as the final reference on all product and operational details should any discrepancies arise in other languages. • Make sure that you keep your set away from water and high temperatures. • Do not use your System immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. • Keep your unit away from humid areas and abnormally hot places. • To prevent personal injury, do not reverse any batteries. • The use of apparatus in moderate climates. • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. • No naked flame sources, such as lighted candles, should be placed on the apparatus. • Attention should be drawn to the environmental aspects of battery disposal. • Minimum distances (2cm) around the apparatus for sufficient ventilations. • The ventilation should not be impeded by covering the ventilation opening with items, such as newspaper, table-cloths, curtains, etc. • The rating plate is located at the bottom cabinet of apparatus. Ecology Help protect the environment - we recommend that you dispose of used batteries by putting them into specially designed receptacles. Maintenance Clean the unit with a soft cloth, or a damp chamois leather. Never use solvents. Power Failure Indicator When AC power is interrupted (disconnected) for a short period of time, both time and alarm settings will change (unless batteries are installed). After AC power is restored (reconnected), the Digital Display will blink to indicate that power was interrupted and you should readjust the time and alarm settings. Plugging In For Power AC OUTLET POWER SUPPLY: 120V~60Hz Note: Power is fed to the unit even when it is not functioning. To cut the power supply off, the power cable must be unplugged. Top View OFF - turns the unit on or off. FWD - sets time (increases value). SNOOZE - enters snooze mode where the alarm will quiet but sound again once the snooze period is over. REV - sets time (decreases value). RADIO/AUX - selects radio or AUX mode. WAKE - OFF - activates and sets wake function. /WAKE1/WAKE2/ - slide switch to set Wake 1, Wake 2 and clock time. NAP - activates nap function. SLEEP - activates sleep function. Back View BRIGHTNESS - selects display brightness. TIME ZONE - slide to select time zone corresponds to your location. DST - turns daylight saving function on or off. AM/FM - selects between AM and FM bands. Right View -VOLUME+ - adjusts volume. TUNING - selects radio frequencies. AUX IN - AUX input jack. Before You Plug for Power 1. Setting Time Zone You may slide the TIME ZONE selector at the back of the unit to Eastern (EST), Central (CST), Mountain (MST) or Pacific (PST) (refer to the maps on the right). 2. Daylight Saving You can slide the DST switch at the back of the unit to turn on/ off in areas observing/ not observing such time change. WARNING: Please avoid playing with these buttons after entering the Clock/Alarm set mode. Auto Clock Set You do not have to set the clock time as a built-in automatic time set system is equipped in this clock powered by 3V (2 X AA batteries, included). All you have to do is to plug this clock for power and current time will be shown automatically. However, the batteries can also be exhausted and we recommend that you replace the batteries every 2-3 years. Brightness Control Clock time and radio frequency are display on the display area at the front of the unit. Slide BRIGHTNESS switch on the back of the unit to HI (high) or LO (low) position to adjust the brightness. Selecting Radio Mode Press RADIO/AUX to switch on radio. Switching Band Slide the AM/FM switch on the back of the unit to select FM or AM band. Tuning the Radio Turn the TUNI...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias