Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. . The graphical symbols are on the bottom enclosure. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Before You Begin Thank you for choosing the Sony Dream Machine. This clock radio will give you many hours of reliable service and listening pleasure. Before operating the Dream Machine, please read these instructions thoroughly and retain them for future reference. Features • Dual alarm FM/AM PLL (phase locked loop) synthesized clock radio • 5 random memory presets • Radio and buzzer alarms with the snooze function • LCD display with backlight Precautions • Operate the unit only on 120 V AC, 60 Hz. • The nameplate indicating voltage, etc. is located on the bottom exterior. • Disconnect the cord by grasping the plug. Never pull it by the cord. • Do not leave the unit in a location near a heat source such as a radiator or airduct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock. • Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, a blanket, etc.) or near materials (a curtain) which might block the ventilation holes. • Should any liquid or solid object fall into the unit, unplug the unit and have it checked by a qualified personnel before operating it further. • When the casing becomes soiled, clean it with a soft cloth dampened with a mild detergent solution. Never use abrasive cleaners or chemical solvents, as they may mar the casing. If you have any question, please consult your nearest Sony dealer. Ground Clamps Electric Service Equipment Specifications Time display 12-hour system Frequency range FM: 87.5-108.0 MHz AM: 530-1710 kHz Channel steps FM: 0.1 MHz (fixed) AM: 10 kHz (fixed) Speaker Approx. 6.6 cm (2 5/8 in) dia. Power output 120 mW (at 10% harmonic distortion) Power requirements 120 V AC, 60 Hz Dimensions Approx. 196 x 56 x 149.5 mm (w x h x d) (7 3/4 x 2 1/4 x 6 in) incl. projecting parts and controls Mass Approx. 510 g (1 lb 2 oz) Design and specifications are subject to change without notice. Antenna Lead-in Wire Antenna Discharge Unit (NEC* Section 810-20) Grounding Conductors (NEC* Section 810-21) Ground Clamps Power Service Grounding —NEC National Electrical Code— Electrode System (NEC* Art 250 Part H) SERVICE Unplug the appliance from the wall outlet and consult qualified service personnel when: -the power cord or the plug has been damaged. -a solid object or liquid has fallen into the cabinet. -the appliance has been exposed to rain or moisture. -the appliance does not appear to operate normally or exhibits a marked change in performance. -the appliance has been dropped, or the enclosure damaged. Do not attempt to service the appliance beyond that described in the operating instructions. For all other servicing refer to qualified service personnel only. • To check the current station, press the preset number button. The band and frequency are displayed for 10 seconds. Setting the Alarm You can set the radio and buzzer alarms at the preset time. Before setting the alarm, be sure to set the clock (See ' Setting the Clock"). 1. Turn off the radio. 2. While holding down ALARM or ALARM , press either TIME SET/ TUNE + or – until the desired time appears in the display. At this time, the or indication appears in the display. 3. Release ALARM or ALARM . 4. Press ALARM MODE until the alarm you want appears in the display. Each time you press ALARM MODE, the alarm indication changes as follows. No alarm indication n n VOL TIME SET/ TUNE CLOCK/ ENTER ALARM RESET SLEEP OFF BANDRADIO ON RADIOA ALARM BUZZERB 1 2 3 4 5 ALARM MODE WAKE UP STATION SNOOZE /SLEEP OFF ........ yyyy ........yyy...