Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to: Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing machine or work bench. Telephone base and charger installation Install the telephone base and charger as shown below. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Wall mount installation in the user’s manual for details. Electrical outlet not controlled by a wall switch Telephone wall jack A DSL filter (not included) is required if you have DSL high-speed Internet service. Plug the small end of the larger power adapter into the power jack on the back of the telephone base. Plug one end of the telephone line cord into the TEL. LINE jack on the back of the telephone base. Route the cords through the slot. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch. Telephone line cord Plug the large end of the smaller power adapter into an electrical outlet not controlled by a wall switch. Raise the antenna. IMPORTANT INFORMATION: Use only the power adapters provided with this product. To obtain a replacement, visit our website at or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling or an under-the-table or cabinet outlet. Route the cord through the slot. Ensure the small end of the smaller power adapter is plugged into the power jack on the back of the charger. Battery installation and charging Battery installation Install the battery as shown below. Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Align the cover flat against the battery compartment, then slide it upwards until it clicks into place. Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light is on when charging. CHARGE light To replace the battery, press the tab and slide the battery compartment cov...
Este manual também é adequado para os modelos :Telefones sem fio - TL32100 (1.87 mb)
Telefones sem fio - TL32200 (1.87 mb)
Telefones sem fio - TL32100 (1.87 mb)
Telefones sem fio - TL32250 (1.87 mb)