Assessments - 2, GPA: 4.5 ( )

Fabricante : A & T International Arquivo Tamanho: 1.87 mb Arquivo Nome : tl32200_QSG_i2.pdf Língua de Ensino:

Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see Wall mount installation in the user’s manual). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (page 2). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use. For customer service or product information, visit our website at or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to: Communication devices such as television sets, VCRs, or other cordless telephones. Excessive heat sources. Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting. Excessive dust sources such as a workshop or garage. Excessive moisture. Extremely low temperature. Mechanical vibration or shock such as on top of a washing machine or work bench. Telephone base and charger installation Install the telephone base and charger as shown below. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Wall mount installation in the user’s manual for details. Electrical outlet not controlled by a wall switch Telephone wall jack A DSL filter (not included) is required if you have DSL high-speed Internet service. Plug the small end of the larger power adapter into the power jack on the back of the telephone base. Plug one end of the telephone line cord into the TEL. LINE jack on the back of the telephone base. Route the cords through the slot. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch. Telephone line cord Plug the large end of the smaller power adapter into an electrical outlet not controlled by a wall switch. Raise the antenna. IMPORTANT INFORMATION: Use only the power adapters provided with this product. To obtain a replacement, visit our website at or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. The power adapte...

Baixe o seu

Para fazer o download, introduza 2 dígitos :