Tighten. See figure 10. 17. Assemble a spring and a 3/8" plain hex nut onto a 3/8" x 1-1/4" hex bolt. Fasten the bolt to the hole shown in the top of the welded bracket using a 3/8" nylock nut. Tighten so that the nylock nut is even with the end of the bolt. See figure 10. 18. Repeat steps 16 and 17 for the (LH) boom arm assembly. 13. Tighten securely the 12 bolts and nuts fastening the frame strap and the front and rear angles to the side angles. (Figures 1 and 2) Tighten only until snug t

45-02931 CAUTION: Read Rules for Safe Operation and Instructions Carefully 25 GALLON "PRO" TOW SPRAYER Assembly Operation Maintenance Repair Parts thefastestway topurchaseparts PRINTED IN USA FORM NO. 48303 (REV. 8/03) RULES FOR SAFE OPERATION Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when operating equipment. 1. Read this owners manual carefully before attempting to assemble or opera

Pan Hd. 10-24 x 1" 41 44947 4 Bolt, Curved Head 5/16-18 x 1-5/8" 10 43910 4 Flat Washer, #10 SAE 42 43086 4 Lock Washer, 5/16" 11 46980 4 Nut, Hex 5/16-18 (SEMS) 43 43343 1 Pin, Hair Cotter #4 (1/8") 12 45085 2 Terminal, .25 Male Tab (not shown) 44 43009 4 Washer, 3/4" 13 46276 1 Adapter, 3/4" GH x 1/2" Barb 45 43093 2 Cotter Pin, 1/8" x 1-1/2" 14 46277 1 Elbow, 3/8 NPT x 1/2" Barb 46 47623 1 Hitch Pin 15 45025 2 Clamp, 1/2" Hose (For Black Hose) 47 45180 1 Hose Clip, Small 45026 2 Clamp