Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
RADIO RECEPTION (cont.) pg. 11 PRESETTING STATIONS The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly. 1 Press TUNER to select a band, and press the UP or DOWN button to select a station. Direct tuning is also available. 2 Press the SET button to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. 3 Repeat steps 1 and 2. No more stations will not be stored if a total of 32 preset stations have already been stored for all the bands. NOTE When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again. PRESET NUMBER TUNING 1 Press the TUNER button to select a band. 2 Press the numbered buttons to select a preset number. Example: To select preset number 25, press 2 and 5. To select preset number 7, press 0 and 7. To clear a preset station Select the preset number of the station to be cleared. Then, press the SET button, and press the SET button again within 4 seconds. The preset numbers of all other stations in the band with higher numbers are also decreased by one. When using the remote control Press the TUNER BAND button to select a band, then press the numbered buttons to select a preset number. DOLBY PRO LOGIC pg. 12 The Dolby Pro Logic feature and the center and surround speakers (standard) assure full-scale home theater sound. When playing back laser discs or video software that have been specially recorded with four-channel sound (left, right, center, surround) and steering logic (for directing sound), astonishingly realistic sound surrounds the listener to create a new level of audio/visual entertainment. Independent control of the four channels allows the listener to enjoy the same type of sound reproduction experienced in movie theaters. Voices are reproduced in the front and center sound field, while ambient sounds like cars and crowds are reproduced on all sides of the listener for an incredibly lifelike audio/video experience. Please read the following carefully to "tune" the systems output to match the characteristics of your listening space. Check the following: • Before using the DOLBY PRO LOGIC, adjust the proper balance of the speaker sound levels (see page 13). • Make sure the speakers are properly connected and positioned (see pages 3 and 4). • Make sure the TV set and video unit are properly connected (see page 3). . • Make sure the laser disc and video tape, etc., support SELECTING DOLBY PRO LOGIC The optimal Dolby Pro Logic mode depends on the type and placement of the speakers. It is recommended that the optional Aiwa speakers should be used for all channels, for example, the SX-R1000 for surround speakers, the SX-C1000 for a center speaker and the SX-AV1000 for front speakers. Check your current type and placement of the speakers and select the recommended Dolby Pro Logic mode accordingly. The recommended mode PHANTOM mode: Select this mode when the center speaker is not connected. All center channel signals are redistributed to the left and right channel speakers. 3CH LOGIC mode: Select this mode when the surround speakers are not connected. TO SELECT A DOLBY PRO LOGIC MODE 1 Press the DOLBY PRO LOGIC button repeatedly to select the appropriate mode. When selecting the DOLBY PRO LOGIC or 3CH LOGIC mode, the indicator lights up, and the selected mode name runs through on the display. Each time the button is pressed, the mode changes as shown below. 2 Press the DOLBY PRO LOGIC button again and hold it down until the center speaker mode to be selected appears. When selecting the DOLBY PRO LOGIC mode in step 1: "NORMAL", "WIDE" and "PHANTOM" appear in turn. When selecting the 3CH LOGIC mode in step 1: "NORMAL" and "WIDE" appear one after another. NOTE • Depending on the sound source or listening condition, surround effect may not be obtained even when the DOLBY PRO LOGIC is on. • The full DOLBY PRO LOGIC effect cannot be obtained when using the software without mark. In this case, use the DSP surround system instead (see page 8). • The DOLBY PRO LOGIC system is automatically canceled when the BBE or DSP system is turned on. DOLBY PRO LOGIC (cont.) pg. 13 ADJUSTING SPEAKER LEVEL BALANCE The unit is equipped with a built-in test signal generator called a noise sequencer for easy balance adjustment of all four channels. The sequencer outputs a noise signal that "travels" from channel to channel, enabling the simple adjustment of sound level to achieve the same apparent loudness, at your listening position, from each channel. 1 Select the Dolby Pro Logic mode according to your current type and placement of the speakers. (See page 12.) 2 Press the MANUAL SELECT button and hold it down for about two seconds until "L TEST" appears. A noise signal is sent to each channel in turn as follows: 3 Adjust the sound level of the center and (or) surround speakers. Whil...