Assessments - 2, GPA: 3.5 ( )

Fabricante : Philips Arquivo Tamanho: 1.84 mb Arquivo Nome : Língua de Ensino:

Some subtitles can create a separate subtitle bar under the video, which limits the video display area. After you switch on auto subtitle shift, the subtitles display on top of the video image, which maximizes the video display area. To switch on auto subtitle shift, see Use more of your TV > Use EasyLink > Maximize display for video with subtitles (Page 35). Hear another device at standby You can hear a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby. To switch on, see Use more of your TV > Use EasyLink > Hear another device at TV standby (Page 35). What you need To benefit from Philips EasyLink advanced control features, make sure that you do the following: . Connect at least two HDMI-CEC compliant devices through HDMI . Configure each HDMI-CEC compliant device properly . Switch on EasyLink Switch on To switch on or off EasyLink Note: If you do not intend to use Philips Easylink, switch it off. 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [On] or [Off], then press OK. Control devices simultaneously If you connect multiple HDMI-CEC devices that support this setting, all the devices respond to the TV remote control. Caution: This is an advanced setting. Devices that do not support this setting will not respond to the TV remote control. 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [EasyLink Remote Control] > [On] or [Off]. 4. Press OK to activate. Notes: . To switch back to TV control, press , then select [Watch TV]. . To control another device, press , then select the device from the Home menu. . To exit, press . EasyLink buttons Control HDMI-CEC compliant devices with the following buttons on the TV remote control. . OK: Start, pause or resume play on the connected device, activate a selection, or access the device menu. . (Previous) / (Next): Search backwards and forwards on the connected device. . Numeric buttons: Select a title, chapter or track. . Play buttons: Control video or music play. . Standby: Display the menu of the connected device. . : Display the TV menu. . (Standby): Switch the TV and the connected device to standby. Other EasyLink buttons are available through the On-Screen Remote Control (OSRC). To access the OSRC 1. While you view content from a connected device, press OPTIONS. 2. Select [Show device keys], then press OK. 3. Select an onscreen button, then press OK. 4. Press to exit. Select speaker output If the connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. An additional audio cable is not required. Make sure you connect the device to the HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI (Page 44). Configure TV speakers 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [TV speakers]. 3. Select one of the following options, then press OK: . [Off]: Switch off TV speakers. . [On]: Switch on TV speakers. . [EasyLink]: Stream TV audio through the connected HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC audio device through the adjust menu. . [EasyLink autostart]: Turn off TV speakers automatically and stream TV audio to the connected HDMI-CEC audio device. Select speaker output with Adjust menu If [EasyLink] or [EasyLink autostart] are selected, access the adjust menu to switch the TV audio. 1. While you watch TV, press ADJUST. 2. Select [Speakers], then press OK. 3. Select one of the following, then press OK: . [TV]: On by default. Stream TV audio through the TV and the connected HDMI-CEC audio device until the connected device switches to system audio control. TV audio is then streamed through the connected device. . [Amplifier]: Stream audio through the connected HDMI-CEC device. If system audio mode is not enabled on the device, audio continues to stream from the TV speakers. If [EasyLink autostart] was enabled, the TV prompts the connected device to switch to system audio mode. Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, switch on Pixel Plus Link. To switch on Pixel Plus Link 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [Pixel Plus link] > [On], then press OK. Maximize video display Some subtitles can create a separate subtitle bar under the video, which limits the video display area. After you switch on auto subtitle shift, the subtitles display over the video image, which maximizes the video display area. Switch on auto subtitle shift 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [Auto subtitle shift]. 3. Select [On], then press OK to activate. Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie expand 16:9]. Hear another device at TV standby You can hear a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby. 1. Press ADJUST to receive audio from the connected Philips EasyLink device. If available, audi...

Baixe o seu

Para fazer o download, introduza 2 dígitos :