Assessments - 3, GPA: 4 ( )

Fabricante : Philips Arquivo Tamanho: 1.84 mb Arquivo Nome : Língua de Ensino:

If multiple languages are available, select the preferred language. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings] > [Language]. 3. Select one of the following settings, then press OK: . [Primary audio] / [Secondary audio]: Select the available audio language. Set a secondary language in the same menu. If the primary language is unavailable, the TV receives this language. . [Preferred audio format]: Select to receive standard audio format (MPEG) or advanced audio formats (AAC, EAC- 3 or AC-3 if available). . [Mono/Stereo]: Select mono or stereo audio if stereo broadcasting is available. 4. Press to exit. Reset to factory settings You can restore default picture and sound settings, while the channel installation settings remain the same. 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Factory settings], then press OK. TV settings are reset to default. Channels Reorder and rename Reorder channels After the channels are installed, you can reorder the channel list to your preference. 1. While you watch TV, press FIND. The channel list is displayed. 2. Select the channel to reorder and press OPTIONS. 3. Select [Reorder], then press OK. 4. Press the Navigation buttons to move the highlighted channel to another location, then press OK. 5. Select one of the following options, then press OK. . [Insert]: Insert the channel into the desired location. . [Swap]: Swap location with another channel. 6. Once complete, press OPTIONS and select [Exit]. Rename channels After the channels are installed, you can rename them to your preference. 1. While you watch TV, press FIND. The channel list is displayed. 2. Select the channel to rename and press OPTIONS. 3. Select [Rename], then press OK. 4. In the entry screen, press the Navigation buttons or Numeric buttons to edit the name, then press OK. Tip: You can press OK in the entry screen to enable the Onscreen Keyboard. 5. Once complete, press the Navigation buttons to select [Done]. . To clear the entry, select [Clear]. . To cancel, select [Cancel]. 6. Press OK to confirm. 7. Press to exit. . Update channel list When the TV was switched on for the first time, a full installation of channels was performed. You can automatically add or remove digital channels or manually update channels. Note: If you are prompted to enter a code, enter '8888'. Automatic update To automatically add or remove digital channels, leave the TV in standby mode. The TV updates channels and stores new channels everyday. Empty channels are removed from the channel list. If a channel update is performed, a message appears at startup. If you do not want this message to appear 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3. Select [Channel installation] > [Channel update message]. 4. Select [Off], then press OK. To disable automatic updates In the [Channel installation] menu, select [Automatic channel update] > [Off]. To manually update channels 1. Press . 2. Select [Setup] > [Search for channels] > [Update channels], then press OK. 3. Follow the onscreen instructions to update the channels. Automatic install When the TV was switched on for the first time, a full installation of channels was performed. You can run this full installation again to set your language, country and install all available TV channels. Select network To install cable or antenna channels, you need to switch to the respective network. 1. While you watch TV, press . 2. Select [Setup] > [Channel settings]. 3. Select [Channel installation] > [Antenna or Cable DVB]. 4. Select one of the following settings: . [Antenna (DVB-T)]: Access free-to-air antenna or digital DVB-T channels. . [Cable]: Access cable or digital DVB-C channels. 5. Press OK to confirm. 6. Press to exit. Start installation 1. Press . 2. Select [Setup] > [Search for channels] > [Reinstall channels], then press OK. 3. Follow the onscreen instructions to complete the channel installation. 4. Once complete, select [Finish], then press OK. Tip: Press FIND to see the channel list. Notes: . During installation, leave settings unchanged unless your digital provider gives you the specific values to enter. . When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels. Install analogue channels You can search and store analogue TV channels manually. Step 1: Select your system Note: Skip this step if your system settings are correct. 1. While you watch TV, press . 2. Select [Setup] > [Channel settings] > [Channel installation]. 3. Select [Analogue: Manual installation] > [System], then press OK. 4. Select the system for your country or region, then press OK. Step 2: Search and store new TV channels 1. In the [Analogue: Manual installation] menu, select [Find channel], then press OK. 2. Select one of the following options: . Press the Navigation buttons or Numeric buttons to manually enter the channel frequency. . Sele...

Baixe o seu

Para fazer o download, introduza 2 dígitos :