Log:
Assessments - 3, GPA: 3.3 ( )

Instruções de Operação Sony, Modelo STR-DE525

Fabricante : Sony
Arquivo Tamanho: 449.1 kb
Arquivo Nome : 3864029111.pdf
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


By connecting your DVD player or other digital video source through a multi-channel decoder (e.g., Dolby Digital (AC-3) decoder) to these jacks, you can enjoy theater-quality Multi-Channel Surround sound in your own home. To enjoy Multi-Channel Surround sound to its full extent, you will need five speakers (two front speakers, two rear speakers, and a center speaker) and a subwoofer. Refer to the instruction manual supplied with your Dolby Digital (AC-3) decoder etc., for details on the 5.1-channel input Required cords Audio cords (not supplied) Two for the 5.1/DVD INPUT FRONT and REAR jacks White (L) Red (R) White (L) Red (R) Monaural audio cords (not supplied) Two for the 5.1/DVD INPUT CENTER and WOOFER jacks VIDEO OUT Dolby Digital (AC-3) decoder etc. 5.1/DVD INPUT 5.1/DVD INPUT VIDEO IN SPEAKERS FRONT SPEAKERS REAR/CENTER WOOFER l4 [ ~j Front speaker (L) Front speaker (R) Rear speaker (L) Rear speaker (R) Center speaker Active woofer DVD players with a built-in Dolby Digital (AC-3) decoder can be connected directly to the 5.1/DVD INPUT jacks on the receiver. See page 14 for details on speaker system hookup. 9 Hooking Up the Components Hooking Up the Components Other Hookups Required cords Audio/video/control S connecting cord (1) (supplied with STR-DE625 only) Yellow (video) White (L/audio) Red (R/audio) ^ нчц_,_^ Black (control S) «дзаидду Yellow (video) White (L/audio) Red (R/audio) Black (control S) Control S connecting cord (1) (supplied with STR-DE625 only) Black .an-iF^nDinniiii nnmfTjpi^-m, Black CTRL S (STATUS) IN/OUT S-LINK CTRL A1 AC power cord AC OUTLET* * The configuration, shape, and number of AC outlets on the rear panel varies according to the model and country to which the receiver is shipped. 10 CONTROL S hookup (STR-DE625 only) CONTROL A1 hookup (STR-DE625 only) If you have a CONTROL S-compatible Sony TV, DBS tuner, monitor, or VCR, use an audio/video/control S connecting cord (supplied) or a control S connecting cord (supplied) to connect the CTRL S (STATUS) IN (for TV, DBS tuner, or monitor) or OUT (for VCR etc.) jack on the receiver to the appropriate S-LINK jack on the respective component. Refer to the operating instructions supplied with your TV, DBS tuner, monitor, VCR, etc., for details. An example of a CONTROL S hookup between the receiver and TV or VCR is shown below. When your TV is connected to the receiver as shown below, the TV input mode will change to video input whenever you turn on the receiver. When you connect the VCR to the receiver as shown below, the input mode of the receiver changes to video 1 (or 2) whenever you turn on the VCR. If you have a CONTROL A1-compatible Sony CD player tape deck, or MD deck Use a CONTROL A1 cord (not supplied) to connect the S-LINK CTRL A1 jack on the CD player, tape deck, or MD deck to the S-LINK CTRL A1 jack on the receiver. See “Displaying the operating status of the component connected to the S-LINK CTRL A1 jack” on page 36 and refer to the separate manual “CONTROL-A1 Control System” and the operating instructions supplied with your CD player, tape deck, or MD deck for details. If you have a Sony CD changer with a COMMAND MODE selector If your CD changer’s COMMAND MODE selector can be set to CD 1, CD 2, or CD 3, be sure to set the command mode to “CD 1” and connect the changer to the CD jacks on the receiver. If, however, you have a Sony CD changer with VIDEO OUT jacks, set the command mode to “CD 2” and connect the changer to the VIDEO 2 jacks on the receiver. Setting the voltage selector (only on models supplied with a voltage selector) Check that the voltage selector on the rear panel of the receiver is set to the local power supply voltage. If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord to a wall outlet. * Audio/video/control S connecting cord ** Control S connecting cord 11 Hooking Up the Components Hooking Up the Components Other Hookups Connecting the AC power cord Before connecting the AC power cord of this receiver to a wall outlet: • Connect the speaker system to the receiver (see page 14). • Turn the MASTER VOLUME control to the leftmost position (0). Connect the AC power cord(s) of your audio/video component(s) to a wall outlet. If you connect other audio/video components to AC OUTLET on the receiver, the receiver will supply power to the connected component(s), allowing you to turn on or off the whole system when you turn on/off the receiver. Caution Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. 12 Hooking Up and Setting Up the Speaker System This chapter describes how to hook up your speaker system to the receiver, how to position each speaker, and how to set up your speakers to...

Este manual também é adequado para os modelos :
receptor e amplificador - STR-DE625 (449.08 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias