Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
You can change a customized sound field any time by making new adjustments to the parameters. See the table on page 28 for adjustable parameters for each sound field. To get the most from Dolby Pro Logic Surround sound Do the procedures “Selecting the center mode” and “Adjusting the speaker volume” on page 16 before you customize a sound field. Changing the delay time (DELAY) You can enhance the Dolby Pro Logic Surround sound even more by delaying the sound output from the rear speakers (delay time). You can select a delay time of 15, 20, or 30 ms. Set a short delay time when the rear speakers are located in a large room or far from where you are listening. 1 Start playing a program source encoded with Dolby Surround sound. 2 Press CURSOR MODE repeatedly until the SURROUND indicator lights up. 3 Use the cursor buttons (A/V) to select "DELAY xxms." The current delay time appears in the display. 4 Use the cursor buttons «/» to change the delay time. Changing the level of effect (EFFECT) You can specify the amount of the surround effect (i.e., its overall presence) in six levels. 1 Press CURSOR MODE repeatedly until the SURROUND indicator lights up. 2 Use the cursor buttons (A/V) to select "EFFECT." The current effect level appears in the display. 3 Use the cursor buttons «/» to change the effect level. Adjusting the volume of the rear and center speakers (REAR/CENTER) If you feel the volume of the rear or center speaker is inadequate (even after adjusting the speaker volume for Dolby Pro Logic Surround), do the procedure below to adjust the volume. Note that the speaker volume adjustment is applied to all sound fields. 1 Press CURSOR MODE repeatedly until the SURROUND indicator lights up. 2 Use the cursor buttons (A/V) to select "REAR xxdB" or "CENTER xxdB." 3 Use the cursor buttons «/» to adjust the speaker volume. You can select a volume level of -15 dB to +10 dB in 1-dB steps. Adjusting the tone (BASS/TREBLE) Adjust the tone (bass or treble) of the front speakers for optimum sound. You can adjust the tone for each separate sound field. 1 Press CURSOR MODE repeatedly until the BASS/ TREBLE indicator lights up. 2 Use the cursor buttons (A/V) to select "BASS xxdB" or "TREBLE xxdB." 3 Use the cursor buttons «/» to adjust the tone level. You can select a tone level of -10 dB to +10 dB in 2-dB steps. 4 Press TONE ON/OFF so that the TONE indicator lights up. z You can turn off the tone adjustments without erasing them The tone adjustments are stored separately for each sound field. Press the TONE ON/OFF button to turn the TONE indicator off. Resetting customized sound fields to the factory settings 1 If the power is on, press 1/U to turn off the power. 2 Hold down SOUND FIELD ON/OFF and press 1/U. “SUR CLEAR” appears in the display and all sound fields are reset at once. 27 Enjoying Surround Sound Enjoying Surround Sound Customizing Sound Fields Adjustable parameters for each sound field Sound field mode GENRE MODE Parameters DELAY EFFECT REARb) CENTERc) TONE Test tone output Off — — 9 From the front speakers On CINEMA PRO LOGIC • • • 9 Depends on center mode (see C STUDIO A • • • D X a • C STUDIO B • • • C STUDIO C • • • N THEATER • • 9 From the front and the rear MONO MOVIE • • £ S £ Z) £ * V a a • MUSIC HALL • • JAZZ CLUB • • DISCOa) • • CHURCHa) • • LIVE HOUSE • • ARENAa) • • STADIUM • • GAME • • a) STR-DE625 only b) Adjustable only when the center mode is set to PHANTOM, NORMAL, or WIDE (see page 16). c) Adjustable only when the center mode is set to 3CH LOGIC, NORMAL, or WIDE (see page 16). z Test tone output when the component connected to the 5.1/ DVD INPUT jacks is selected The test tone is successively output from the speakers in the following order: front (L), center, front (R), rear (R), rear (L). The volume level of the center and rear speakers cannot be adjusted at this time. Note To adjust the speaker volume using a test tone as described on page 16, select the PRO LOGIC sound field. The test tone output in all other sound fields is used for verifying whether there is output from speakers or not. 28 Receiving Broadcasts This chapter describes how to receive FM or AM broadcasts and how to preset selected stations. You can tune in stations on this receiver in the following ways: Direct Tuning You can enter a frequency of the station you want directly by using the numeric buttons (see page 30). Automatic Tuning If you don’t know the frequency of the station you want, you can let the receiver scan all available stations in your area (see page 31). Preset Tuning After tuning in stations using Direct Tuning or Automatic Tuning, you can preset them in the receiver (see page 31). Then you can tune in any of the stations directly by entering its 2-character code (see page 32). You can preset up to 30 stations (FM and AM). The receiver will also scan all the stations that you have preset (see pa...
Este manual também é adequado para os modelos :receptor e amplificador - STR-DE525 (449.1 kb)