If someone borrows this tool, make sure they have these instructions also. ADDITIONAL RULES FOR SAFE OPERATION cont. 1. Remove the Planer from the Storage / Carrying Case and inspect it carefully to make sure that no breakage or damage has occurred during shipping. 2. Do not discard any of the packing materials until all parts are accounted for. 3. The planer has a Crescent Wrench force-fitted into the Storage / Carrying Case. 4. The Edge Guide is force-fitted into the top of the lid of the Stor

....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Besides the data sheet and parts in this insert, the content in the Model W1754 owner's manual is the same for both machines. Before operating your new machine, you MUST read and understand this insert and the entire Model W1754 manual to reduce the risk of injury from improper use or setup. If you have any further questions about this manual insert or the differences between the Model W1754S and the Model W1754, contact our Technical Support at (360) 734-3482 or email tech-support@shopfox.biz.

#JB10201 PRINTED IN CHINA ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Contents INTRODUCTION..................................................................................................3 INTRODUCTION SET UPELECTRICAL SAFETYWoodstock Technical Support............................................................................ 3 Specifications............................................................................................... 4 Controls and Features..................................................................................... SAFETY............

The anti-kickback fingers hang from a rod suspended across the cutter headstock. The anti-kickback fingers should be inspected regularly. Check the fingers (Figure 37) to ensure that they swing freely and easily. If the fingers do not swing freely and easily, clean them with a wood resin solvent. Proper operation of the anti-kickback fingers is essen- tial for the safe operation of this machine. Failure to ensure that they are working properly could result in serious operator injury. Figure 37.

(For models manufactured since 5/10) #BL12964 printed in China Congratulations on your purchase of a Model G0453PX Planer! The Model G0453PX is the same machine as the Model G0453Z but with a "cool" new look. All parts differences are shown below. Except for the differences noted in this insert, all other content in the Model G0453Z manual applies to this machine. Before operating your new machine, you MUST read and understand this insert, and the entire G0453Z manual to reduce the risk of serio

....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Note—If the table rollers are too high, snipe or chipping may occur at the ends of the workpiece. Only use the higher settings for rough cut lumber. If you are unsure about which height to use, experiment on scrap lumber by using the trial and error method. Always start at the smaller tolerances and work up. 3. Pull the adjustment lever up to the appropriate scale marks. Secure the adjustment lever by tightening the lock. Extreme Duty Planers -15 -16- Extreme Duty Planers Read the entire manual

Although not required, we recommend using a Rotacator® for the following setup. Check with the current Grizzly catalog for details. To set the feed rollers and pressure bar with hardwood blocks: 1. Make sure the machine is disconnected from power and the knives have been adjusted properly! 2. Obtain a milled piece of hardwood that is within .002" from one side to another. Rip this piece down the middle. (Two separate boards may also be used if they are within .002" of each other in thickness.) 3