Log:
Assessments - 2, GPA: 3.5 ( )

Instruções de Operação McCulloch, Modelo C344

Fabricante : McCulloch
Arquivo Tamanho: 1.49 mb
Arquivo Nome : 1012aa67-0d24-426e-bdce-42cf23263587.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


10 Filling the fuel tank...............................11 Starting the Engine ............................ 12 IMPORTANT! The information contained in these instructions describes units available at the time of publication. Echo, Inc. reserves the right to make changes to products without prior notice, and without obligation to WARNING! The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. make alterations to units previously manufactured. PAGE Stopping the Engine ........................... 13 Checking Unit Condition..................... 13 Operation............................................ 13 Maintenance....................................... 16 Long Term Storage............................. 21 Troubleshooting Guide ....................... 22 Warranty ............................................. 25 Attention Statements Throughout this manual are special “attention statements”. DANGER! A statement preceded by the triangular attention symbol and the word “DANGER” contains information that should be acted upon to prevent serious injury or death. Warning and Operational Labels 50FEET(15m) Read and follow this operator's manual. Failure to do so could result in serious injury.. Wear eye and hearing protection at all times during operation of this unit. Wear head protection where there is a risk of falling objects. Make sure no one is within 15 M / 50 feet of an operating machine. WARNING! A statement preceded by the triangular attention symbol and the word “WARNING” contains information that should be acted upon to prevent serious bodily injury. IMPORTANT! A statement preceded by the word “IMPORTANT” is one that possesses special significance. Beware of thrown or richocheted objects DO NOT operate this unit with a blade unless the unit is equipped with a Shindawiaapproved handlebar or barrier. WARNING: Surface can be hot. Always wear gloves when handling this unit. HOT SURFACE NOTE: A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier. Always wear a harness when operating this unit with a blade. A harness is also recommended when using trimmer line. If unit is used as a brushcutter, beware of blade thrust. A jammed blade can cause the unit to jerk suddenly and may cause the operator to lose control of the unit. Safety Work Safely WARNING! Trimmers and brushcutters operate at Never make unauthorizedvery high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruction to operate this unit! Stay Alert NEVER extend trimming line beyond the length specified for your unit. ALWAYS keep the unit as clean as practical. Keep it free of loose vegeta- ALWAYS hold the unit firmly with both hands when cutting or trimming, and maintain control at all times. ALWAYS use the proper cutting tool ALWAYS keep the handles clean. ALWAYS disconnect the spark plug wire before performing any mainte- nance work. fast in a cut, shut off the engine imme- ALWAYS, if a saw blade should bind diately. Push the branch or tree to ease the bind and free the blade. You must be physically and mentally fit to operate this unit safely. drugs, medication or any other sub- attachment installations. WARNING! Never oper- ate power equipment of any kind if you are tired or if you are under the influence of alcohol, stance that could affect your ability or judgement. WARNING! Use Good Judgment ALWAYS inspect unit before each use. Replace any damaged parts. NEVER run the engine when transporting the unit. tion, mud, etc. NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause serious injury or death. ALWAYS stop the unit immediately if it suddenly begins to vibrate or shake. for the job. Inspect for broken, missing or improperly installed parts or attachments. Safety Labels IMPORTANT! Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer. HOT SURFACE This label indicates the minimum distance between front handle and rear grip per ANSI B175.3. Safety (continued) The Properly Equipped Operator hearing. Wear close-fitting clothing to protect legs and arms. Glovesoffer added protection and are wear clothing or jewelry thatcould get caught in machinery NEVER wear shorts! can damage your hands. Keep a proper footing and overreach times during operation. toed shoes or sandals. barefooted! Always make sure condition. Do not cutting attachmentshield is missing, loose, or broken. Be Aware of the Working Environment Make sure bystandersor observers outside the 15 meter (50feet) “dangerzone” wear eyeprotection. Reduce the risk of bystanders being struck by flying debris. Make sure no one is within 15 meters (50 feet)— that’...

Este manual também é adequado para os modelos :
Ferramentas para Jardim - C344 (1.49 mb)
Ferramentas para Jardim - C344 (1.49 mb)
Ferramentas para Jardim - C344 (1.49 mb)
Ferramentas para Jardim - C344 (1.49 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias