4. The contents described in the parts list may change due to improvement. 5. The parts for the machine shall be supplied seven (7) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.] APPLICABLE SERIAL NUMBERS : Dec.2001 BC3401DL DRIVE UNIT

• FILTER ASS'Y • CLIP SCREW LABEL, cover GUARD 4500-75190 4500-75160 1140-75320 5500-75170 4500-75210 4500-75511 4700-75310 4500-13161 4500-13181 4500-13150 4500-13130 T1196-81000 T1196-06030 1850-81450 ––––––––– ––––––––– ––––––––– ––––––––– ––––––––– ––––––––– T1196-06020 ––––––––– ––––––––– ––––––––– ––––––––– 1850-81490 1850-81520 1751-81510 T1108-81910 1751-81240 1751-81130 1881-81140 ––––––––– 1752-81110 5500-81120 1751-81180 5730-81170 1881-81130 1850-81530 5500-81160 0263-90550 T1184-821

APPLICABLE SERIAL NUMBERS : 90200101 and up US-1 PSZ2450S SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. ¦ WARNINGS IN THE MANUAL WARNING This mark indicates instructions which must be followed in order to prevent accidents which could lead to s

Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual. Thank you for buying a Ryobi trimmer. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS TABLE OF CONTENTS ¦ ¦¦¦¦¦ Safety..................................................................................................................................................................... 2 -3 ¦ ¦¦¦¦¦ Symbols............

1. When restarting the engine immediately after stopping it, leave the choke open. 2. Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it. ¦ STOPPING ENGINE (OP4) 1. Release the throttle lever and run the engine for a half minute. 2. Shift the ignition switch to the “Stop” position. (OP4) • Except for an emergency, avoid stopping the engine while p

Be especially careful at this time to check that there is nothing wrong with the blades or with the joints by which the blades are attached to the brushcutter. ■ Things to check before starting up the engine •Take a careful look around to make sure that no obstacles exist within a perimeter of 15 feet (5m) or less around the brushcutter before starting the engine. •The RedMax brushcutter is equipped with a centrifugal clutch mechanism which causes the cutting blades to begin to rotate as soon

2-line Head........................................................................................................1 pc. Shoulder Strap..........................................................................................................1 pc. Goggle.......................................................................................................................1 pc. Tool Kit...............................................................................................................

[It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of ten (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.] APPLICABLE SERIAL NUMBERS : Oct.1999 BC2300DL BC2600DL BC3400DL BC4400DW DRIVE UNIT 500000000 and up DRIVE UNIT 500000000 and up DRIVE UNIT 980101 and up DRIVE UNIT 980101 and up ENGINE UNIT 990639 and up ENGINE UNIT 978729 and

Also be sure never to allow children or anyone unable to fully understand the directions given in this manual to use this brushcutter. •Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide. •Never use your brushcutter under circumstances like those described below: 1.When the ground is slippery or when other conditions exist which might make it not possible to maintain a steady posture while using the brushcutter. 2. At night, at times of heavy fog, or at any o

Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use. • Check the intake air cooling vent and the area around the cylinder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the brushcutter. Note that it is necessary to remove the plug guard shown in Figure 20 in order to be able to view the upper part of the cylinder. Storage_ • Aged fuel is one of major causes of engine starting failure. B