Squeeze and hold trigger. (see Figure 1, Steps 1 and 2) 2. Continue to hold trigger while sliding the handle bracket onto chain saw handle (see Figure 1, Step 3). The trigger support on the bracket will hold the trigger in the “ON” position (see Figure 2). 3. Attach pole assembly to chain saw. Align the holes in the pole bracket and handle bracket. Using four Philips head screws and lock washers provided, insert screws through lock washers and holes in pole bracket. Tighten screws securely wit

Improper use of Pole Trimmer can cause severe injury or death. Keep this manual for future reference. ® ELECTRIC POLE TRIMMER SAFETY WARNINGS WARNING:Whenusingelectric PoleTrimmers,basicsafetyprecautions should always be followed to reduce the risk of fire, electric shock, and personal injury. WARNING: This product contains chemicals known to the State of California to cause cancer or birth defects, or other reproductive harm. BEFORE OPERATING POLE TRIMMER READ ALL INSTRUCTIONS BEFORE OPERATING

Refer to chain saw manual for assembly instructions. POLE SAW NAMES AND TERMS Coupling Nut Threaded collar (loosen to slide inner pole, tighten to hold pole in position). Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain. Inner Pole The moveable section of tubing to which the saw is attached. Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is moving. The guide bar will kick up and