Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
User Select Enable this function to select the country you are now locating. Fragmentation Threshold The mechanism of Fragmentation Threshold is used to improve the efficiency when high traffic flows along in the wireless network. If your 802. Wireless LAN Adapter often transmit large files in wireless network, you can enter new Fragment Threshold value to split the packet. The value can be set from 256 to 2346. The default value is 2346. RTS/CTS Threshold RTS/CTS Threshold is a mechanism implemented to prevent the “Hidden Node” problem. If the “Hidden Node” problem is an issue, users have to specify the packet size. The RTS/CTS mechanism will be activated if the data size exceeds the value you set.. The default value is 2347. This value should remain at its default setting of 2347. Should you encounter inconsistent data flow, only minor modifications of this value are recommended. Access Point To set your 802.11g Wireless LAN USB Adapter as an Access Point (AP). In access point mode, the 802.11g Wireless LAN USB Adapter will function as an access point. This allows you to set up your wireless networks without using a dedicated AP device. Up to 16 wireless stations can associate to the 802.11g Wireless LAN USB Adapter. To the 802.11g Wireless LAN USB Adapter to bridge your wired and wireless network, the following requirements must be met: 1. The 802.11g Wireless LAN USB Adapter must be installed on a computer connected to the wired network. 2. Either configure network sharing (refer to the appendix for an example) or bridge the two interfaces (wireless and wired) on the computer. 3. Set the wireless station’s IP address to be in the same subnet as the computer in which the 802.11g Wireless LAN USB Adapter is installed. Refer to Configuring the Wireless Station Computer. Select the Access Point mode, and you will see the following figure. Network Adapter You can select the network adapter from the pull-down menu, it shows the device itself(the 802.11g Wireless LAN USB Adapter)and also shows the devices supported by the 802.11g Wireless LAN USB Adapter. Connection Station List It shows the stations which are now connecting to the AP. Channel Shows the selected channel that is currently in use. (There are 14 channels available, depending on the country.) SSID The SSID is the unique name shared among all points in your wireless network. The name must be identical for all devices and points attempting to connect to the same network. It shows the current SSID setting of the Wireless USB Adapter. WEP The WEP function here has been disabled. If you want to change to Enabled, click More Setting… to configure. Tx Power The Tx power here is configured as Level 0, to change the Tx power, click More Setting… to configure. More Setting… Click the More Setting… button and the following figure will appear for you to configure(Refer to the More Setting… part on the next page for more information about this figure.) Tx Frame The quantities for the wireless network card transmit. (Frame: The unit of packet) Rx Frame The quantities for the wireless network card receive. (Frame: The unit of packet) More Setting… Channel Shows the selected channel that is currently in use. (There are 14 channels available, depending on the country.) Mode Select Mixed Mode or 802.11b only, 802.11g onlystandard Mode (If you choose this option the device will automatically convert the suitable standard ). SSID The SSID is the unique name shared among all points in your wireless network. The name must be identical for all devices and points attempting to connect to the same network. It shows the current SSID setting of the Wireless USB Adapter. Tx Power Select the Tx power from the pull-down menu, there are four levels including Level 1, Level 2, Level 3 (Minimum). Change or Apply Click Changeto set the General Connection Setting. After Completing the setting Click Apply. WEP You can select to Enable or Disablethe WEP function by selecting from the pull-down men. Click Setting and the following figure will appear. Authentication Mode Select the Authentication mode from the pull-down menu, there are two modes for you to choose, Open System and Shared Key. Fragment The mechanism of Fragmentation Threshold is used to improve the efficiency when high traffic flows along in the wireless network. If your 802. Wireless LAN Adapter often transmit large files in wireless network, you can enter new Fragment Threshold value to split the packet. The value can be set from 256 to 2346. The default value is 2346. RTS/CTS RTS/CTS Threshold is a mechanism implemented to prevent the “Hidden Node” problem. If the “Hidden Node” problem is an issue, users have to specify the packet size. The RTS/CTS mechanism will be activated if the data size exceeds the value you set.. The default value is 2347. This value should remain at its default setting of 2347. Should you encounter inconsistent data flow, only minor modifications of this value are recommended. Preamble A pream...