Assessments - , GPA:
(
)
)
Fabricante : HP
Arquivo Tamanho: 217.78 kb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
por este dispositivo também tem outras instruções :
Equipamento de rede - HP-UX 11i v2 I/O Cards (142.89 kb)
Equipamento de rede - HP-UX 11i v2 I/O Cards (315.4 kb)
Facilidade de uso
HP PCI-X 2-port 4X Fabric (HPC) Adapter Installation
HP Fabric Clustering System Installation Prerequisites
•
HP requires all systems in the fabric to use the same bundle, IB4X-00.
•
HP requires all switches in the fabric to use the same firmware image version such as:
HP-374305-001-Release-2.2.0hp-build018.img
•
Chec k th e HP PCI-X 2-port 4X Fabric Adapter Release Notes for known problems, required patches, or
other information needed for installation, available at http://www.docs.hp.com in the Networking &
Communications section.
The latest switch firmware and is available online at: http://support.hp.com
1. Select Software and Driver downloads.
2. Enter your product name.
3. Click the double arrow.
Refer to the section “Configuration, Image, and Log Files” section of the HP Fabric Clustering System
HP-UX Administrator's Guide.
•
Confirm that the HP Fabric adapter and software is supported on the HP server and IO slot chosen; see
HP Fabric Clustering System Support Matrix, available at http://www.docs.hp.com in the Networking &
Communications section.
•
Each AB286C Host Channel Adapter card requires 512 MB host memory in supported servers.
•
Determine where the switch is to be installed and which servers are to have an HCA installed.
•
To use the Internet Protocol over InfiniBand (IPoIB) protocol, see “Internet Protocol over InfiniBand
(IPoIB)” on page 8.
•
The installed version of IP Filter must be higher than “B9901AA A.03.05.06 HP IPFilter 3.5alpha5”.
•
Check the cluster configuration plan for information on where to install adapters, switches, and cable
guides, and where cables are to be routed.
For more information about the configuration plan, please refer to the Planning the Cluster section of the
HP Fabric Clustering System HP-UX Administrator's Guide.
•
Check your server’s documentation to see if additional tools may be required for component installation.
•
For specific instructions on adapter installation, see system-specific documentation on “installing
networking adapters” for each server that adapters will be installed into.
•
On-Line Addition and Replacement (OL*) of HP Fabric adapters is supported on HP Fabric Clustering
System version B.11.23.02 or newer with a couple of limitations; see “On-Line Addition and Replacement
Operations (OL*)” on page 9
•
Confirm that there are cables of proper length to make connections in the fabric (adapter to adapter,
adapter to switch, or switch to switch).
•
Confirm that HP Fabric Clustering System software suite software media is available. It is included on
CD or available on the Web through http://www.software.hp.com.
•
Confirm that HP-UX super-user privileges are available; they are necessary to complete the installation.
•
Confirm that the /usr/bin, /usr/sbin, /sbin, and /opt/rdma/bin directories are in your PATH by
logging in as root and using the echo $PATH command.
•
Confirm that the HP-UX operating system is the correct version, HP-UX 11i v2. Use the uname -a
command to determine the HP-UX version of your system. For more information about the required
operating system versions, see HP PCI-X 2-port 4X Fabric Adapter Release Notes.
4
Chapter 1
...