Assessments - 4, GPA: 4 ( )

Fabricante : Actiontec electronic Arquivo Tamanho: 3.14 mb Arquivo Nome : NS-100_NAS_Device_User_Manual.pdf Língua de Ensino:

With the Utility, the administrator can check the NAS Device’s status, add or delete users, or create user groups. Accessing the Administrative Utility To establish a connection from a computer to the NAS Device: 1. Open a Web browser. 2. In the Address text box, enter “and the NAS Device's IP address. If using the default IP address, enter: . Note: If the port number used by the Device has been changed (on the System screen) from the default (80), specify the correct port number when connecting. For example, if the current port is 8080: 3. Once connected, the following screen is displayed. 1 Actiontec Network Attached Storage Device User Manual 1 1 4. To access the Administration interface, click Administration on the right. A password prompt appears, as shown below. 5. Enter “admin” for the name, and leave the password blank. • To gain access, enter the user name and password of a user in the “Administrators” User Group. • By default, the only user in the “Administrators” User Group is “admin.” (Other users can be added later.) • The default password for the “admin” user is blank (no password). This should be changed. Click User Password on the NAS Device home screen to change the password. 6. The “Users” screen appears, as described in the following section. Use the menu tabs to select the other screens as desired. Users This is the first screen that appears after selecting “Administration.” This screen allows the user to manage other users created on the NAS Device. • The “guest” and “admin” users are pre-defined, and cannot be deleted. • Users can be members of many user groups. • When a user is created, a Share (folder) is created for them, with the same name. Only the user and the Administrator group can access this new Share. Name Enter the user name here. Note that punctuation and other special characters (e.g. * / | \ ) cannot be used in the name. Comment Enter a comment here. Password/Verify Password Enter the user’s password in these text boxes. These text boxes are also used to change an existing user’s password, as follows: 1. Select the desired user. 2. Clear the existing values in the password text boxes. 3. Enter the desired password in both the “Password” and “Verify Password” text boxes. If no password is required, leave both text boxes blank. 4. Click Update. When creating a new user, enter the desired password in both of these text boxes. Create Private Folder If creating a new user: • Checking this option creates a Group and a Private Folder (Share) with the same name as the user. • The “Private Folder (Share) Location” text box allows the user to select which disk is used for the Private Folder. • Read/Write access will be granted to the Share. If changing an existing user: • The check box has no effect - it will neither create nor delete. This option is only available when creating a new user. • However, the user's private folder can be moved to another disk (if installed) by changing the location, and saving the change. Enable Disk Quota Enable the check box to set the disk usage for the user, then enter the maximum amount of disk space this user is allowed to access. . Note: Unless the check box is checked, the Disk Quota text box has no effect. Users List This list shows all existing users. Details of the selected user are displayed in the “Properties” area when scrolling through the list of users. Save as New User Use this button to create a new user, after entering their data in the “User Properties” text boxes. Clear Form Use this button to clear the form, preparing the form for the entry of a new user. Groups Click this to view and/or modify the Groups which the selected user is in. Delete Click this button to delete the selected user. MWarning: When a user is deleted, his/her private folder, and any data it contains, is deleted. If this data is important, the administrator should copy it to another folder before deleting the user. Save Use this button to save any changes made to the “User Properties” for an existing user. Modifying Existing User Properties 1. Select the desired user from the list. Their details will be displayed in the “User Properties” text boxes. 2. Edit the “User Properties” text boxes as required. Note that the “Create matching Share and Folder” option when modifying a user cannot be changed. However, the “Share (Private Folder) Location” text box can be modified to change to location of a user's Private Folder, if it already exists. 3. Click Save to save the changes. System Status This screen displays many of the NAS Device’s current settings Server Name The current name of the NAS Device. This name will be shown in “Network Neighborhood” or “My Network Places.” IP Address IP address currently used by the NAS Device. Current Status Indicates the current status of the Device. This will usually display “Available” or “Ready” If the Device is not available, the message will say why the Device is not av...

Baixe o seu

Para fazer o download, introduza 2 dígitos :