Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
A guard or other part that is damaged should be properly repaired or replaced by an authorised service facility, unless otherwise indicated in this Instruction Manual. Defective switches must be replaced by an authorised service facility. Do not use a tool if the switch does not turn the tool on and off correctly. 17. Use only approved parts. When servicing, use only identical replacement parts. Use an authorised service facility to fit replacement parts. Additional safety Instructions 1. This appliance is not intended for he use by young and infirm person unless have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance. 2. Before use check the supply and extension cord of signs of damage or aging. If the cord becomes damaged during use, disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worn. Additional safety rules for blowers 1. Always wear adequate protective clothing when operating the tool to avoid injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and ear defenders. 2. Do not start the tool when it is upside down or when it is not in the operating position. 3. Switch the motor off and remove the plug when the tool is not being used, left unattended, being cleaned, being moved from one place to another or when the extension cord is entangled or damaged. 4. Use only outdoor rated extension leads that are so marked. Keep the extension cord away from heat, oil and sharp edges. 5. Do not operate the tool near people, especially children or pets. Turn it off if they get too close. Maintain a safe distance of at least 5m from other people when using the tool. 6. Never direct the blower tube towards bystanders or pets. Never blow debris in the direction of bystanders or pets. 7. Do not handle the plug or the tool with wet hands and do not use the tool in the rain. 8. Ensure that the extension lead is secured in a manner that prevents it form disconnecting from the plug whilst in use. 9. Keep all the air intakes and the blower tube free of dust, lint, hair and other material that may cause a reduction in air flow. 10. Keep a balanced and stable stance while using the tool. 11. Do not switch on the tool in enclosed or poorly ventilated spaces or in the presence of inflammable and/or explosive substances such as liquids, gasses and powders. 12. Only operate the tool during broad daylight or with adequate artificial light. 13. When the tool is not in use, store it in a dry place and out of reach of children. 14. After use, disconnect the tool from the power supply and check for damage. If you have the slightest doubts, contact an authorised service centre. 15. Only use the tool according to the instructions given in this manual. 16. Check regularly that the screws are tight. 17. Use only spare parts and accessories recommended by the manufacturer. 18. Do not try to repair the tool or access internal parts. Contact authorised service centres only. 19. Do not get distracted and always concentrate on what you are doing. Use common sense. Never operate the tool when you are tired, sick or under the influence of alcohol or other drugs. Unpacking Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Know your product Your GMC BL5000A Blower is designed to blow dry, light-weight material such as leaves, grass, small twigs and small pieces of paper. 1. Handle 2. Power cord restraint 3. Switch 4. Blower tube 5. Blower tube nozzle 6. Inlet cover 7. Air vents 3 1 7 4 2 5 6 Assembly 1. Fit the blower tube (4) onto the motor housing. 2. Push the blower tube onto the housing depress the locking button and slide the tube until the lock button locates into hole. 3. To remove tube depress the lock button and slide the tube off the housing neck Use of extension cord WARNING. A damaged extension cord can cause electric shock or a fire. Please inspect the extension cord periodically. The tool must not be used if the cord is damaged in any way. Replace a damaged extension cord before use. 1. Use a heavy duty extension cord, suitable for outdoor use and so marked. An ordinary duty extension cord will cause loss of power and may overheat. 2. Keep the extension cord behind you, away from the area of operation. Switching on and off 1. To switch on, move the switch (3) to the “I” position. 2. To switch off, move the switch (3) to the “0” position. WARNING. The tool runs for approximately 5 seconds after it has been switched off. Let the motor come to a complet...
Este manual também é adequado para os modelos :Sistemas de ventilação - BL5000A (715.92 kb)