Assessments - 3, GPA: 4.3
(
)
)
|
Fotos e especificações Stihl BR 600 |
Facilidade de uso
NLine up the control handle (1) with the tube's seam – as shown. NSecure the control handle (1) with the screw (3) so that it can still be moved on the blower tube (2). BR 550, BR 600 NDepending on your size and reach: Push blower tube (1) up to the 3452BA102 KN12452BA096 KN 123 Mounting the Blower Tubes BR 500 452BA095 KN 123 N Depending on your size and reach: Push blower tube (1) up to the appropriate mark on the blower tube (2). N Rotate the blower tube (1) in the direction of the arrow and engage it in the appropriate slot (3). appropriate mark on the blower tube (2). N Rotate the blower tube (1) in the direction of the arrow and engage it in the appropriate slot (3). BR 500, BR 550, BR 600 English Mounting the Hose Clamps and Pleated Hose NPush the hose clamp (1) (with retainer for throttle cable) onto the elbow (3) – the positioning marks must face to the left. NPush the pleated hose (2) over the elbow (3). 21452BA108 KN 3452BA109 KN 2143 N Push the hose clamp (1) onto the pleated hose (2). N Line up the positioning marks on the hose clamp (1) and elbow (3) – the screw eye faces down. N Secure the hose clamp (1) with the screw (4). NPush the hose clamp (5) (without retainer for throttle cable) onto the elbow (6) – the positioning marks must face to the right. NPush the blower tube (6) into the pleated hose (2). Mounting the nozzle NPush the nozzle (1) onto the blower tube (2) and engage it on the lugs (3). 2452BA103 KN 56312452BA111 KN Removing the Nozzle NPush the hose clamp (5) onto the pleated hose (2). NLine up the hose clamp (5) and blower tube (6) – as shown. NSecure the hose clamp (5) with the screw (7). NRotate the nozzle (1) in the direction of the arrow until the lugs (3) are covered. NPull the nozzle (1) off the blower tube (2). 25452BA104 KN 67312452BA112 KN BR 500, BR 550, BR 600 English Adjusting the Control Handle 3452BA110 KN 12 NMove the control handle (1) along the blower tube (2) to the most comfortable position. NSecure the control handle (1) with the screw (3). Wear Mark on Nozzle 452BA100 KN The front end of the nozzle is worn by ground contact during operation. Replace the nozzle when it has worn as far as the wear mark. Fitting the Transport Aid When storing or transporting the machine: NSecure the blower tube to the handle on the backplate. NEngage the throttle cable (4) with sleeve (5) in the retainer (6). NSecure the velcro strip to the blower tube – pull the flap through the buckle. BR 500, BR 550, BR 600 English Loosening the harness straps Adjusting the Throttle Fitting the Harness Cable It may be necessary to correct the adjustment of the throttle cable after assembling the machine or after a prolonged period of operation. 373BA004 KN Adjust the throttle cable only when the unit is completely and properly assembled. NAdjust the harness straps so that the backplate fits snugly and securely against your back. A Adjust height B Adjust angle Tightening the harness straps NSet throttle trigger to the full throttle position – as far as stop. NCarefully screw home the screw in the throttle trigger until you feel initial resistance. N Lift the tabs of the sliding adjusters. 373BA003 KN N Pull the ends of the straps downward. BR 500, BR 550, BR 600 English 4-MIX Engine The STIHL 4-MIX engine features mixture lubrication and must be run on a fuel mixture of gasoline and engine oil. It operates otherwise on the 4-stroke principle. Fuel This engine is certified to operate on unleaded gasoline and the STIHL two- stroke engine oil at a mix ratio of 50:1. Your engine requires a mixture of high- quality gasoline and quality two-stroke air cooled engine oil. Use mid-grade unleaded gasoline with a minimum octane rating of 89 (R+M/2). If the octane rating of the mid-grade gasoline in your area is lower, use premium unleaded fuel. Fuel with a lower octane rating may increase engine temperatures. This, in turn, increases the risk of piston seizure and damage to the engine. The chemical composition of the fuel is also important. Some fuel additives not only detrimentally affect elastomers (carburetor diaphragms, oil seals, fuel lines, etc.), but magnesium castings and catalytic converters as well. This could cause running problems or even damage the engine. For this reason STIHL recommends that you use only high-quality unleaded gasoline! Gasoline with an ethanol content of more than 10% can cause running problems and major damage in engines with a manually adjustable carburetor and should not be used in such engines. Engines equipped with M-Tronic can be run on gasoline with an ethanol content of up to 25% (E25). Use only STIHL two-stroke engine oil or equivalent high-quality two-stroke engine oils that are designed for use only in air cooled two-cycle engines. We recommend STIHL HP Ultra 2-Cycle Engine Oil since it is specially formulated for use in STIHL engines. Do not use BIA or TCW rated (two- stroke water cooled) mix oils or other mix oils that state they are for use in both water coo...
Este manual também é adequado para os modelos :Sistemas de ventilação - BR 500 (1.96 mb)
Sistemas de ventilação - BR 550 (1.96 mb)