Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Craftsman, Modelo RBL500

Fabricante : Craftsman
Arquivo Tamanho: 1.44 mb
Arquivo Nome : 662_950_6901.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


The user has to c ;cept responsibility for others. - Never use the blower while under the influence of alcohol or drugs(2). - Do not use the blower when you are tired. - Save these instructions for future referral. PERSONAL PROTECTIVE EQUIPMENT - The clothing worn should be functional and appropriate, i. e. it should be tight-fitting but not cause a hinderance. Do not wear jewelry, clothing or long hair which could be drawn into the air intake. - In order to avoid head-, eye-, hand- or foot injuries as well as to protect you hearing the following protective equipment and protective clothing must be used during operation of the blower. PAY PARTICULAR ATTENTION TO THE FOLLOWING REGULATIONS: - Clothing must be sturdy and snug-fitting, but allow complete freedom of movement. Avoid loose-fitting jackets, flared or cuffed pants, scarfs, neck chains, unconfined long hair or anything that could be drawn into the air intake. Wear overalls or long pants to protect your legs. Do not wear shorts. (4) - Blower noise may damage your hearing. Wear hearing protection. Continual and regular users should have their hearing checked regulary. (3) - Use of gloves when working with the blower is recommended. Good footing is most important. Wear sturdy shoes with nonsrip soles. (4) - Proper eye protection is a must. Even though the discharge is directed away from the operator, ricochets and bouncebacks can occur during blower operations. (3) - Never operate a blower unless wearing goggles or properly fitted safety glasses with adequate top and side protection which comply with ANSI Z 87. 1 (or your applicable national standard). - To reduce the risk of injury associated with the inhalation of dusty, use a face filter mask (3) in dusty conditions. STARTING UP THE BLOWER - Please make sure that there are no children or other people within a working range of 50feet or 15 meters (5), also pay attention to any animals in the working vicinity. - Before operating, always check that the blower is safe for operation: Check the security of the throttle lever. The throttle lever should be checked for smooth and easy action. Check for proper functioning of the throttle lever lock. Check for clean and dry handles and test the function of the STOP switch. Keep handles free of oil and fuel. - Before operation, check and follow all local and federal regulations on backpack blowers. - Only start the blower positioned on the ground. - Do not start it on the back. 3 Start the blower only in accordance with the instructions. Do not use any other methods for starting the engine (6)! - Use the blower and the tools supplied only for applications specified. - Start the blower engine only after the entire blawer has been assembly is done. Operation of the blowers is permitted only after all the appropriate accessories are attached! - To reduce the risk of injuries associated with contacting rotating parts, stop the engine before installing or removing attachments. Do not aperate without guard(s) in place. - The engine is to be stopped immediately if there are any engine problems. - When working with the blower, always wrap your fingers tightly around the handle, keeping the control handle cradled between your thumb and forefinger. Keep your hand in this position to have your machine under control at all times. Make sure your control handle is in good condition and free of moisture, pitch, oil or grease. Always ensure a safe, well-balanced footing. - Operate the blower in such a manner as to avoid inhalation of the exhaust gases. Never run the engine in enclosed rooms (risk of suffocation and gas poisoning). Carbon monoxide is an odorless gas. Always ensure there is adequate ventilation. - Stop the engine when resting and when leaving the blower unattended. Place it in a safe location to prevent danger to others, setting fire to combustible materials, or damage to the machine. - Never lay down the hot blower onto dry grass or onto any combustible materials. - Never operate the engine with a faulty exhaust muffler. - Stop the engine during transport (7). - Put the blower in upright position and fix it during car or truck transportation to avoid. - When transporting the blower, ensure that the fuel tank is completely empty to avoid fuel leakage. - Do not sit on the blower or throw it around. REFUELLING - To reduce the risk of fire and burn injury; handle fuel with care. It is highly flammable. - Stop the engine during refuelling (7), Keep well away from open flame (8) and do not smoke. - Avoid skin contact with petroleum products. Do not inhale fuel vapor. Always wear protective gloves during refuelling Change and clean protective clothing at regular intervals. - Take care not to spill either fuel or oil, Always wipe unit dry before starting engine. Allow wet cloths to dry before disposing in proper, covered container to prevent spontaneous combustion. - Avoid any fuel contact with your clothing. Change your cloth...

Este manual também é adequado para os modelos :
Sistemas de ventilação - RBL500 (1.44 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias