B. Air flow restricted. C. Engine oil level low. A. Adjust carburetor. See engine manual. B. Remove blower housing on engine and clean as described in the engine manual. C. Fill crankcase with the proper oil. NOTE: For repairs beyond the minor adjustments listed above, please contact your local service dealer. PARTS LIST FOR LEAF BLOWER MODELS 692, 693 and 694 REF. NO. PART NO. COLOR CODE DESCRIPTION NEW PART REF. NO. PART NO. COLOR CODE DESCRIPTION NEW PART 1 749-0479 Upper Handle 18 747-

It is optional equipment on all other models. CONTENTS OF HARDWARE PACK: (See Figure 1) A (2) Carriage Bolts B (2) Hand Knobs C (1) Hex Sems Bolt FIGURE 1. PARTS IIM CARTON (See Figure 2): D (1) Upper Handle E (1) Directional Discharge FIGURE 2. USE THIS HOLE ONLY NOTE The right and left side of your leaf blower is determined from operator's position. 1. Remove the leaf blower, hardware pack and all literature from the carton before discarding carton. 2. Figure 3 shows lower handle.

and Mfg. Code which appear on your unit in the space below. You must have these numbers, along with the date of purchase, in order to receive warranty or service. MEETS ANSI SAFETY STANDARDS MODEL NO. MFG. CODE Made ^ in AMERICA WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or st

5/16-24 x 1.00" Lg.* 24 710-0118 Hex Scr. 5/16-18 x .75" Lg.* 25 736-0217 L.-Wash. 3/8" Scr. Heavy Duty 26 712-0241 Hex Nut 3/8-24 Thd.* 27 712-0113 Wing Nut 1/4-20 Thd. 28 736-0173 Fl.-Wash. 1/4" I.D. 29 13742 Deflector - Chute N 30 13741 Deflector N 31 710-0134 Carriage Bolt 1/4-20 x .62" Lg. 32 2192-002 Caster Assembly 33 1548-021 Roll Pin 34 13738 Guard Assembly N 35 13796 Impeller Guard N 36 13735 Housing Assembly Complete N 37 710-0152 Hex Scr. 3/8-24 x

Do Not allow exhaust to be pointed in the direction of persons. 17. No one should operate this unit while intoxicated or while taking medication that impairs the senses or reactions. 3 ASSEMBLY INSTRUCTIONS flü^ note Vacuum hose attachment 247-204-000 comes with model 694. It is optional equipment on all other models. CONTENTS OF HARDWARE PACK: (See Figure 1) A (2) Carriage Bolts B (2) Hand Knobs C (1) Hex Sems Bolt FIGURE 1. FIGURE 2. USE THIS HOLE ONLY FIGURE 3. NOTE The right an

BOX 368022 • CLEVELAND, OHIO 44136-9722 FORM NO. 770-96-7D Models 685 and 689 7D — Page 2 Models 685 and 689 PARTS LIST FOR MODELS 685 AND 689 POWER VACUUMS REF. NO. PART NO. CODE DESCRIPTION REF. NO. PART NO. CODE DESCRIPTION 1 05778B Clutch Grip Ass’y. 43 - Engine 2 711-0679 Clevis Pin .375" Dia. x 1.88" 751-0581 Muffler Guard Ass’y. (Incl. 3 747-0154 Clutch Rod 32" Lg. Hardware)tt 4 749-0787 Handle Brace 46 748-0201 Spacer .63" I.D. x .88" O.D. x 5 — Part of Engine .

54th Street, Chandler, Arizona 85226 or if in Canada call 1-800-668-1238. No product returned directly to the factory will be accepted unless prior written permission has been extended by the Customer Service Department of MTD SOUTHWEST INC. This limited warranty does not provide coverage in the following cases: A. Wear items - Bump Knobs, Outer Spools, Cutting Line, Inner Reels, Starter Pulley, Starter Ropes, Drive Belts B. MTD does not extend any warranty for products sold or exported outside

x 62 764-0162A Vacuum Bag—Felt 7.50" Lg.t 63 1539-019 Push Speed Nut .25" Dia. Stud 23 716-0104 Snap “E”-Ring .50" Dia. Shaftt 64 749-0785 Lower Handle 24 756-0367 “V”-Pulley 5/8" x 6.50" O.D.f 66 726-0100 Push Nut 3/8" Dia. 25 748-0142 Flange Bearing .502" I.D.t 67 711-0737 Stud Pin .250" Dia. x 1.75" 26 14570 Gear Box Mounting Brackett 69 714-0145 Internal Cotter Pin 3/8" Dia. 27 732-0376 Extension Spring .75” O.D. x 70 749-0786 Upper Handle 3.28” Lg.t 71 738-0185 Rea

B. Clean air cleaner as described in engine manual. 5. Engine overheats. ■k A. Carburetor not adjusted properly. B. Air flow restricted. C. Engine oil level low. A. Adjust carburetor. See engine manual. B. Remove blower housing on engine and clean as described in the engine manual. C. Fill crankcase with the proper oil. .OTE: For repairs beyond the minor adjustments listed above, please contact your local service dealer. 7 Models 692, 693, 694 and 24695 If YOU WRITE TO US ABOUT THIS ARTI OR

770-1795 (R810807) INDEX Safe Operation Practices........................................3 Maintenance and Lubrication..................... Assembly Instructions............................................4 Off-Season Storage............................. b Operation................................................................5 Illustrated Parts........................8, 9, 10, 11 Adjustments............................................................6 Parts Information...................