Assessments - 3, GPA: 3 ( )

Fabricante : Hotpoint Arquivo Tamanho: 512.98 kb Arquivo Nome : Língua de Ensino:

9. Foods which discolour should be protected by coating in fat or tossing in water to which lemon juice has been added, prior to placing food in the oven. 10. Dishes containing liquid should not be filled too full to prevent boiling over. 11. Food should be well sealed (but not airtight) in a container to prevent the loss of liquid during cooking. Aluminium foil gives a good seal. 12. Ensure food is cooked thoroughly before serving. 1. Make sure all oven controls are turned Off. 2. Check that the electricity supply to the oven is turned On. 3. Check that the oven clock is at the right time of day. Know your Timer (C367E & C368E) CLOCKFACE The timer incorporates a 24 hour clock. Ensure the correct time of day is always set, before using your cooker. SYMBOLS A ‘bell’ symbol will light up when you select a Minute Minder Period and will remain lit for the period set. At the end of the Minute Minder Period, the timer will emit an audible tone and the ‘bell’ symbol will flash. The ‘cookpot’ symbol will light up either:– – When the timer is in manual mode, or – During the actual Cook Period. ‘AUTO’ will light up:– – When the timer is first turned on it will flash. It will go out when a time of day is set or when the timer is set to manual. The ‘AUTO’ symbol will flash at the end of an Auto Cooking programme to indicate that the programme has finished. (When the ‘AUTO’ symbol is flashing, to return the oven to Manual operation, turn the oven controls off, ensure that the correct time of day is set, and press the “Manual” button – The ‘AUTO’ symbol will go out). TIMER FUNCTION BUTTONS Minute Minder Here you can set a time period of up to 23 hours 59 minutes, that will count down. Button When it reaches zero, the timer will emit an audible tone. For Example: If you set 20 minutes, the audible tone will occur 20 minutes later. AUTO COOKING PROGRAMME Cook Period Button Cook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an “Auto Cooking” programme. (e.g. If you set 2 hours, the food will be cooked for 2 hours). End Time Button The time of day at which you want an “Auto Cooking” programme to end. For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme has finished. Notes: -When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s) when you set the timer. - If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time. Manual Button Needs to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation. “+” and “–” Buttons Used to adjust the various timer function settings. Electronic Clock & Automatic Oven Timer Operation (C367E & C368E) SETTING THE TIME OF DAY Step 1 Make sure all oven controls are turned Off. Step 2 Check the electricity supply to the cooker is turned on. Step 3 When switched on the display will show 0.00 and the Auto symbol, flashing intermittently. Step 4 Press & hold in both the Cook Period & End Time buttons together. Step 5 With the Cook Period & End Time buttons still held in, press either the “+” or “–” buttons to set the correct time of day. Step 6 Release all the buttons simultaneously. THE TIME OF DAY IS NOW SET. To change the time of day repeat Steps 4, 5 & 6 above. Note: You cannot adjust the time of day if the timer has been set for an Auto Cooking Programme. SETTING THE MINUTE MINDER Step 1 Ensure the time of day is set correctly. Step 2 Press and hold the Minute Minder button. Step 3 With the Minute Minder button held in, set the required Minute Minder period using the “+” and “–” buttons. A ‘bell’ symbol will light up. Release all buttons and the timer display will revert back to the time of day. The ‘bell’ symbol will remain lit to signify that a Minute Minder period has been set. At the end of the set time an audible tone will be heard, and the ‘bell’ symbol will flash. Step 4 To cancel the audible tone press the Minute Minder button. Note 1 When the Minute Minder has been set, the time remaining can be checked at any time by simply pressing the Minute Minder button. Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by pressing and holding the Minute Minder button and then at the same time pressing the “–” button until 0.00 appears in the display window. Electronic Clock & Automatic Oven Timer Operation (C367E & C368E) AUTO COOKING PROGRAMMES There are two Auto Cooking programmes that can be selected using your timer:– (a) To set the timer to switch the oven(s) On and Off Automatically (b) To set timer to switch on immediately and OFF automatically after a set cook period. a) Step 3 Press and hold in the Cook Period button. The display will read 0.00 with the ‘cookpot’ symbol lit / flashing ‘Auto’ symbol. Ste...

Baixe o seu

Para fazer o download, introduza 2 dígitos :