Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates important information, that if not followed, may cause damage to equipment. NoTe: Information that requires special attention. Safety Symbols The following Safety Symbols appear throughout this manual to alert you to important safety hazards and precautions. Risk of Personal Injury Risk of Fire Wear Eye and Mask Protection Read Manual First Risk of Explosion Risk of Falling Wear Eye Protection Wear Hearing Protection Risk of Shock INStruCtIoNS PertaININg to a rISk oF FIre, eleCtrIC SHoCk, or INjury to PerSoNS This manual contains important safety, operational and maintenance information. If you have any questions, please call 1-800-543-6400 for customer assistance. When using tools, basic precautions should always be followed, including the following: CalIForNIa ProPoSItIoN 65 This product or its power cord may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. geNeral a. To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. Failure to follow warnings, dangers, and cautions could result in DeATH or SeRIoUS INJURY. b. Be thoroughly familiar with the controls and the proper use of the equipment. Follow all instructions. Contact your Campbell Hausfeld representative if you have any questions. c. Only persons well acquainted with these rules of safe operation should be allowed to use the unit. Do not operate or allow anyone else to operate the tool if any warnings or warning labels are not legible. Warnings or warning labels are located on the tool magazine and body. Always assume the tool contains fasteners. Respect the tool as a working implement; no horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. Accidental triggering of the tool could result in death or serious personal injury. Do not make any modifications to the tool without first obtaining written approval from Campbell Hausfeld. Do not use the tool if any shields or guards are removed or altered. Do not use the tool as a hammer. Personal injury or tool damage may occur. Clean and check all air supply hoses and fittings before connecting the tool to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced. Work area a. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. b. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. c. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. 4 Operating Instructions and Parts Manual CHN71600 Important Safety Information (Continued) PerSoNal SaFety a. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons. b. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts. c. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. d. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Ensuring that the tool is used only when the operator and all other personnel in the work area are wearing ANSI Z87 eye protection equipment, and when required, other appropriate protection equipment such as head, hearing and foot protection equipment. Serious eye or permanent hearing loss could result. e. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss. performing an operation where the tool or fastener may contact hidden wiring. Contacting a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Hold tool by insulated gri...
Este manual também é adequado para os modelos :Pistola de pregos - IN729800AV (5.75 mb)