Single (full sequential actuation) firing To fire, grip tool firmly to maintain control, position the contact safety nose (1) of tool onto work surface, and squeeze trigger (4) to fire a fastener. Allow tool to recoil away from work surface as fastener is driven. This “full sequential actuation” method provides the most accurate fastener placement. Where to use framing nailer Framing nailer guns are used mainly in heavy construction applications. Some additional important safety applications are

118V MAGNESIUM ALLNAILER® ALN18V INSTRUCTION MANUAL BlackCyanMagentaYellowCode: ALN18V IMDate: 061212Edition: 17Op: DCRBlackCyanMagentaYellowCode: ALN18V IMDate: 061212Edition: 17Op: DCR ContentsContents Warranty 2 Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 4 General safety rules 4 Additional safety rules for cordless nailers 6 Additional safety rules for the charging system 7 Additional safety rules for the battery pack 7 Know your product 9 Accessories 10

Assembly The ACALN Allnailer® is packed fully assembled. Adjusting the depth of nail penetration 1. The depth adjustment dial can be set to 4 different positions in order to vary the depth of nail penetration as follows: Depth setting values (approximate only) Position Depth 1 Nail head underflush by 1mm 2 Nail head level with the surface 3 Nail head 5mm proud from surface and suitable for hanging heavy objects (ensure that the mounting surface is capable of taking the weight loading) 4 Nail hea

• Connect tool to air supply hose with a coupling that automatically removes all pressure from the tool when the coupling is disconnected. • Do not exceed maximum operating pressure of this tool of 120 PSI. • Only use air hose that is rated for a maximum working pressure of at least 120 PSI or 150% of the maximum system pressure, which ever is greater. • Always verify prior to using the tool that the air source has been adjusted to the rated air pressure range. Risk of loss of hearing What could

This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be replaced free of charge with another of the same item. A small freight charge may apply. The warranty replacement unit is only made available by returning the tool to the place of purchase with a confirmed register receipt. Proof of purchase is essential. We reserve the right to reject

Firing speed Max. Length of nail Max. Magazine Capacity 230-240 Volts 50 Hz 20-Nail-per minute Up to 32mm long (drives five lengths) Holds up to 100 nails DIRECTIONS FOR USE Step one: Loading your Master Nailer 1. Unplug from power source. 2. Only use nails recommended. 3. Slide the pusher backwards from position B to position A by levering the catch (1) backwards. 4. Load selected nails (nail points facing downwards) into the track of magazine (2). 5. Head of nail can go above and below