Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
The Network Connecting screen appears. 10. Wait until the connection confirmation message is displayed, and then press the ENTERS button. The Network Setup screen re-appears. 11. To test the connection, press the RETURN button to select Network Test, and then press the ENTERS button. Network Setup (Ad-Hoc) You can connect to a mobile device without an access point through the "Samsung Wireless LAN Adapter" by using a peer to peer network. ^ This function is available when SWL(Samsung Wireless Link) is set to Off. How to connect to new Ad-hoc 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)". (P. 26) 2. Choose Select a network. A list of devices/networks appears. 3. While in the device list, press the Blue button on the remote. ^ The message Ad-hoc is a direct WI-Fi connection with cellphone or PC. The existing network system may have limited functionality. Do you want to change the network connection? is displayed. 4. Input the generated Network Name (SSID) and Security Key into the device you want to connect. How to connect an existing Ad-hoc device 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)". (P. 26) 2. Choose Select a network. Then, the device list will be displayed. 3. Select the device you want in the Device list. 4. If security key was applied, input the security key. ^ If network does not operate normally, check the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction. Network Setup (Manual) If the other methods do not work, you need to enter the Network setting values manually. Getting the Network Connection Values To get the Network setting values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support tab, click the Details button. The Network settings are displayed. Network Setu English 27 04 Advanced Features Advanced Features How to set up manually To enter the Network settings into your TV, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)". (P. 26) 2. Press the ▼ button to select Internet Protocol Setup, and then press ENTERS button. Press the A or ▼ button to select Manual, and then press ENTERS button. 3. Press the ▼ button to go to the first entry field (IP Address). 4. Use the number buttons to enter numbers. 5. When done with each field, use the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 6. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the A or ▼ button to go to DNS. 8. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 9. When done, press the A button to go to Select a Network. Select your network, and then press ENTERS button. 10. Go to Step 4 in the "How to set up automatically" (P. 26), and follow the directions from that point on. Network Setup (SWL (Samsung Wireless Link)) This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV ^ To use the Internet@TV, the AP (access point) must be connected to the wireless network. ^ If a Samsung Wireless Lan Adapter is connected to the USB 2 port, the network may not operate normally. We recommend to connect to USB 1 (HDD) port. ^ Only sharers using the 2.4 Ghz band are supported. Sharers using the 5 Ghz band are not supported. SWL connect You can directly connect a device that supports the PBC (WPS) to the TV. ^ This function is available when SWL(Samsung Wireless Link) is set to On. How to connect Samsung Wireless link For the procedures to establish a connection, refer to the following: 1. Follow Steps 1 through 5 in the "How to set up using PBC (WPS)". (P. 26) 2. Select Samsung Wireless Link by using the ▼ button and press the ENTERS button to turn it On. 3. Select SWL connect by using the ▼ button and press the ENTERS button. 4. If the "Press the PBC button on the device which supports PBC button to connect within 120 seconds" message appears, press the PBC button on the device to connect. ^ For more information, refer to the wireless network setup manual of the device to be connected. 5. If the device is connected properly to the TV after starting count on message box then message box will be disappeared automatically. ^ If the connection fails, please retry after 2 minutes. If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC addres...
Este manual também é adequado para os modelos :TV - LE32C650L (40.15 mb)
TV - LE32C653M (40.15 mb)
TV - LE32C654M (40.15 mb)
TV - LE37C650L (40.15 mb)