Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
6) MENU Button: Open or close TV menu. 7) Up/Down/Left/Right Buttons: Navigate on-screen menus. CH+/-: Select the previous or next channel. 8) ENTER Button: Execute item or confirm setting. 9) SOURCE Button: Switch between TV and AV IN. 10) WIDE Button: Switch the screen between 16:9 and 4:3. 11) RF IN: Connect to the internal or external antenna. 12) AV IN: Connect to a Audio Video device like a DVD Player or VCR using the supplied audio video cable. 13) Power/Charge Indicator LED: Lights green when the TV on and lights red when the battery is charging. 14) DC Jack: Connect to the power adapter. 15) Antenna Rod: Extend and adjust for better reception. 9 English PDF created with FinePrint pdfFactory Pro trial version 2. Remote Control (Refer to Figure 3) 45 6 1 2 7 8 9 3 10 11 Figure 3 1) MENU button: Open or close TV menu. 2) Navigation buttons: Navigate on-screen menus. ENTER button: Execute item or confirm setting. 3) Number keys: Use to select channels. - button:Always use it with number keys to input a channel number, such as “7-1”. 4) AUTO button: Search for channels automatically. 5) DISPLAY button: Press to display information. 6) GUIDE button: Display the list of available channels and the corresponding channel information. 7) SOURCE button: Switch between TV and AV IN. 8) MUTE button: Press to shut off the volume. 9) AUDIO button: Select one of the audio soundtracks. 10) CH+ button: Selects next channel. 11) CH- button: Selects previous channel. 10 PDF created with FinePrint pdfFactory Pro trial version Settings Menu Press MENU button to enter the Main menu, use the navigation buttons to select and set the items and press ENTER to select. 1. Clock OSD Duration: Select the duration of the on-screen display. Sleep Timer: The TV turns off if inactive for amount of time (5,10,15, 30,45,60,90,120,180, 240 Min or Off). Time Zone: Select your time zone. Daylight Saving Time: Turn Daylight Saving On/Off. 2. Setup Language: Select different languages. Transparency: Make the menu transparent. Closed Caption: You can choose a kind of closed caption you desire and set it on or off. TV Display Modes: Switch among Auto, Wide, Zoom, Cinema. Restore Default: Reset settings to factory default. 3. Channel Setup(only on TV) Antenna: Switch between air and CATV. Auto Scan: Scans for channels to save to memory. Erases previously saved channel information. Auto Scan Add CH: Scans for channels to save to memory, but does not erase previously saved channel information. Channel Skip: Set the TV to skip specific channels. Channel NO: Switch the channel, but remains in Menu mode. Channel Label: Lets you edit the program label that appears when a channel is selected. NOTE: Press MENU button to exit. English 11 PDF created with FinePrint pdfFactory Pro trial version Connecting a TV Antenna/ Cable to Receive Channels To view television channels correctly, a signal must be received from one of the following sources: 1. An indoor or outdoor antenna 2. A cable system, note that after your subscription is active, unplug the Antenna from the TV as shown below. Then plug in the cable from the cable company to the RF IN on your TV. Unplug Antenna Connect Cable from your Cable Company Using antenna/cable to receive programs a. For the first time you turn on the TV, there is not any channel stored, a pop-up screen appears: “Do you want to proceed with auto scan?” The selection of YES enables you to perform a auto scan without navigating to the channel setup menu first. b. After finishing auto scan, a channel list will be save in the TV. You can also follow below steps to re-scan the available channels for your TV. 1. Press the SOURCE button to make sure your TV is in the TV mode. 2. Press the MENU button to enter the main menu. 3. Press the RIGHT button twice to highlight the “Antenna icon”. 4. Press the DOWN ARROW (CH-) to highlight the Antenna selection. 12 PDF created with FinePrint pdfFactory Pro trial version 5. Press the LEFT or RIGHT button to select CATV/Air selection for the antenna selection. 6. If you are using the indoor or outdoor antenna, select Air here. Press the DOWN button and select “Auto Scan”. 7. If you are using the cable system, select CATV. Press the DOWN button to select “Auto Scan”. Use LEFT or RIGHT button to set the Cable System you desire, Auto should be the correct setting for most cable systems. If you choose Air for the antenna selection, the Cable System selection is unavailable. Then press the DOWN button and select “Start to Scan”. 8. The TV will start scanning the channels and store the channels found in TV’s channel memory. 9. When the scan is complete, the number of channels will be shown on the screen and the TV will tune to the first channel found. 10. Use the same way to select “Auto Scan Add CH” to add more channels to those scanned. NOTE: Press MENU button to interrupt the channel scanning. If t...