Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
PG-13 Unsuitable for children under 13 R Restricted; under 17 requires accompanying parent or adult guardian NC-17 No one under 17 admitted X Mature audience only • When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. • When you turn “G” to [VIEW], then all ratings will turn to [VIEW] automatically. - 16-EN 9I03 5 Exit the V-Chip setting mode Exit the V-Chip setting mode Press the MENU button on the remote control to enter the setting and exit the screen. CHANGE ACCESS CODE To change access code, follow the steps. FM MODE (13” MODEL ONLY) 1 Select “V-CHIP SET UP” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select “VCHIP SET UP”. Then, press the F.FWD/B button. 2 Enter Access code Use the number on the remote control to enter the access code. Note: The default code is 0000. 3 Select “CHANGE CODE” Press the PLAY/K or STOP/L button to select "CHANGE CODE". Then, press the F.FWD/B button. 4 Enter New code Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen. ACCESS CODE – V-CHIP SET UP – TV RATING MPAA RATING B CHANGE CODE • If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space. NEW CODE X X X X CONFIRM CODE 5 Exit the V-Chip setting mode Press the MENU button on the remote control to exit the screen. Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary. This function enables you to receive FM radio broadcasting. 1 Set the FM mode Press the TV/FM button on the FM 88.0 MHz remote control. The radio frequency appears on the TV screen. 2 Select the radio frequency you want to receive Press the CHANNEL K or L button until your desired radio frequency appears. NOTES: • The radio frequency indication repeats to appear and disappear. • You can not record the FM radio station. • If you receive a weak radio signal, you may change the FM Antenna mode to INT(internal) or EXT(external) by following the step below. 1)Press the MENU button. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button. 2)Press the PLAY/K or STOP/L button to point to “FM ANTENNA”. Select [INT] or [EXT] using the F.FWD/B or REW/s button. PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE PRECAUTIONS Insert the cassette in the direction as shown. Push in • Avoid moisture. Moisture condensation may occur gently, but continuously, on the center-back of the on the tape if it is moved from a cold place to a cassette until it is drawn into the TV/VCR. The warm place or visa versa. Before using a tape with TV/VCR will automatically turn on. these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated. • Avoid extreme heat, high humidity and magnetic fields from speaker systems. • Do not tamper with the cassette mechanism. • Do not touch the tape with your fingers. Window WRONG CORRECT - 17-EN 9I03 NORMAL PLAYBACK NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR will start playback automatically. 2 To begin playback PLAY B Press the PLAY button. Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu, then press the PLAY button. 3 To stop playback Press the STOP button when playback is completed. AUTO REPEAT PLAYBACK The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part of more than 10 seconds. 1 Select “USER’S SET UP” – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK Press the MENU button on the remote control. CHANNEL SET UP B USER’S SET UP V-CHIP SET UP Press the PLAY/K or STOP/L but- LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN ton to point to “USER’S SET UP”. TIME SEARCH INDEX SEARCH Then, press the F.FWD/B button. – USER’S SET UP – 2 Select “ALL” or “BLANK” Press the PLAY/K or STOP/L but- RENTAL B REPEAT PLAY [OFF] [ALL] AUTO RETURNton to point to “REPEAT PLAY”. Press the F.FWD/B or REW/s button repeatedly until your desired selection [ALL] or [BLANK] appears. 3 Exit the Repeat Play setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears. • Once you select the Repeat ...
Este manual também é adequado para os modelos :TV - SRC2213W, SRC2419 (358.67 kb)