Assessments - 3, GPA: 4.3 ( )

Fabricante : JVC Arquivo Tamanho: 8.25 mb Arquivo Nome : Língua de Ensino:

Figure 16. New Device screen Edit NetCommand Screen Figure 15 If you selected Edit when you were at the Finish screen, the Edit NetCommand screen displays. Your choices are: Add Add a new device to the NetCommand setup. “Learn” the remote control signals of devices listed as “Other” brands. See Figure 16. Change Change the brand/model, input connections, or name of a device already listed in the configuration. “Learn” the remote control signals of devices listed as “Other” brands. See Figure 25. Guide Edit TV Guide On Screen® ZIP code and input selections. See the separate TV Guide On Screen Interactive Program Guide User’s Manual for more information about customizing the Guide. See Figure 4. Review View a list of all devices and input connections in the NetCommand home theater configuration, including the A/V receiver. This is also where you can turn On or Off unused TV inputs or devices. See Figure 5. Delete Remove a device or erase the complete NetCommand home theater configuration. The learned remote control signals are erased when the associated device is deleted. See Figure 26. Initial Start the setup at the beginning. This button only becomes available after deleting the complete configuration, or if NetCommand was not set up when the TV was first powered On. See Figure 2. Figure 15. Edit NetCommand screen Edit NetCommand®: Adding Devices, continued [Device] Screen Figure 17 If you selected “None” for a device type during initial setup, you can later select the Add option and add a device with this screen. This screen also opens when you select the Change option in the Edit NetCommand screen. The sample screens here show the choices for adding a VCR; similar screens will appear for any satellite receiver, DVD player, or cable box. Figure 17. [Device] screen Choose ONE of these options: • Select a recognized manufacturer. The model number optimized for NetCommand will display at the bottom of the screen. If a number follows the manufacturer’s name, (example: Mitsubishi 1), this indicates additional models are optimized for that manufacturer. For many device types, non-listed models will operate in the same way as the listed models and you can still use the pre-loaded setting. After selecting Next>, the screens that follow are: the Name Screen (Figure 20), Connection screen (Figure 21) and specialized device screens (Figures 22-24), ending with the Finish screen (Figure 27). • Select “Other,” then highlight “Learn” and press ENTER. This will allow you to have NetCommand learn the remote control signals of this new device. After selecting “Learn” and pressing ENTER, the screens that follow are: [Device] Learn screen (Figure 18), [Device] Advanced Learn screen (Figure 19), Name screen (Figure 20), Connection screen, (Figure 21) and specialized device screens (Figures 22-24), ending with the Finish screen (Figure 27). • Select “Other,” skip Learn and select Next>. This will allow the device to appear and will allow NetCommand to switch inputs to use this device. However, NetCommand will not be able to control this device. Later you may use the “Change” option in the Setup menu to learn the remote control signals. After selecting Next>, the screens that follow are: the Name Screen (Figure 20), Connection screen (Figure 21) and specialized device screens (Figures 22-24), ending with the Finish screen (Figure 27). Hint: The cable box and satellite receiver learn screens include PVR functions. [Device] Learn Screen Figure 18 Shown only if “Learn” was selected 1. Press ADJUST to select the check box for each function to be learned. 2. Press ENTER and the function name will begin to flash to confirm the ready-to-learn status. 3. Press the button on the device’s remote control that corresponds to the selected function. A check mark will appear and the function name will stop flashing. This confirms the signal learned status. 4. To test the learned command, press the ENTER button on the TV remote while the learned function is still highlighted. The device should perform the selected function. The device needs to be turned on and the IR emitters properly placed for the test to be successful (see page 31 for IR emitter placement). 5. Repeat for each function to be learned. 6. To erase a learned function, highlight the check box for that function and press CANCEL. 7. When the function signals have been learned, press ADJUST to select Next> and move to the [Device] Advanced Learn screen. NOTE: When learning the device’s remote control signals, point the device’s remote control at the TV screen. Hint: If the device’s remote control uses a single button for both Power On and Power Off, don’t learn the Power Off function. Edit NetCommand®: Adding Devices, continued The screens described below may not be necessary for your device setup. If they do not display automatically on screen, they are not required. VCR for Recordings Screen Figure 22 Select the VCR to use for making analog recordings through NetCommand or the TV...

Baixe o seu

Para fazer o download, introduza 2 dígitos :