Log:
Assessments - 3, GPA: 3.3 ( )

Instruções de Operação JVC, Modelo WD-73C8

Fabricante : JVC
Arquivo Tamanho: 2.67 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Care of the Remote Control • Use only alkaline batteries. • Be within 20 feet of the equipment. • Do not press two or more buttons at the same time unless instructed to do so. • Do not allow unit to get wet or become heated. • Avoid dropping on hard surfaces. • Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth. • Do not mix old and new batteries. 28 4. TV Operation and Features 4. TV Operation and Features 29 ChannelView Channel Listings ChannelView screen ChannelView™ shows memorized channels on ANT 1 or ANT 2. It displays channel names and program information as sent by broadcasters or your local cable service provider and may be incomplete. No program information is displayed for analog channels. An analog channel name is displayed only if you assigned a name in the Setup > Edit menu (page 43). To receive ChannelView updates: • Keep the Energy Mode set to Fast Power On • Set the TV clock • Leave the TV powered off for a while each day to receive updates. Note: Whenever you watch a digital channel, listings are updated for the channel you are watching. Using ChannelView Feature Press Key See ChannelView listings Press GUIDE. from ANT 1 or ANT 2. Close ChannelView Press GUIDE or EXIT. Scan channels one by one. Press and hold or . Scan channels quickly. Press and hold PAGE /. Jump to listings for a spe-1. Enter the channel cific channel. number (see numbers in upper left of screen). 2. Press ENTER. See more of the program Press INFO. description (if available). Move navigation to the Press . program listings. Move navigation to the Press . channel listings. Tune to the highlighted Press ENTER. channel. NetCommand for HDMI Devices Available for all TV models. The TV’s remote may operate some functions of compatible CEC devices without any additional setup. See the your devices’ owner’s guides for instructions on enabling the devices’ CEC capabilities. If you have a CEC-enabled A/V receiver, CEC-enabled devices connected to the A/V receiver with an HDMI cable may also be controllable. They can be selected from the TV’s Input Selection menu. See “A/V Receiver with HDMI Output,” page 23, and the Inputs > Name menu, page 47. Test your equipment with the TV’s remote control to find out which commands are supported. See below for commands that may be available, depending on the individual device. As an example of using NetCommand for HDMI devices, you would press PLAY on the device itself to: • Turn on the TV if not already on • Switch to the device (no need to display the Input Selection menu) • Begin play of the device CEC-enabled VCR, DVD, and DVR functions that may be available: Record/ Playback Menu Navigation Channel Tuning Other CH / GUIDE — CANCEL F1 (content)* ENTER Digits 0–9, — CANCEL ENTER MENU (to cancel) The F1 key defaults to work like the devices’s LIST * key. CEC-enabled A/V receiver functions that may be available: • Try the VOL, MUTE, and menu-navigation keys. • To open the A/V receiver menu, follow these steps: 1. While watching TV, press AUDIO. 2. Press repeatedly until the Speakers option displays. 3. While Speakers is still displayed, press MENU. 736 and 835 series models: You can add commands in addition to those supported by CEC. Use NetCommand IR “learning” after connecting and placing IR emitters for the devices. See “Initial NetCommand Setup for Most Devices,” page 53, and “Setting Up NetCommand Control of an A/V Receiver,” page 57. Status Display Press the INFO key to see the on-screen status display. The most common displays are shown here. You will rarely, if ever, see all status indicators at the same time. On-screen status display sample information Tuesday 9:10 PM Sleep 30 min 1413 MUTE Signal Strength 1615 8 Ant 1 7-1 KABC-HD Monday Night Football HD 16:9 Standard St. Louis vs. Tampa Bay TV-PG Fav1 Stereo English 6 9 12 1 3 42 11 5 7 8 10 Analog Sources Digital Sources 1. Source antenna or input Source antenna or input 2. Analog channel being received (antenna sources only) Digital major and sub-channel numbers (antenna sources only) 3. Analog channel name (if named in the Setup > Edit menu); antenna sources only. Digital Channel Name (if broadcast or if named in the Setup menu > Edit options; antenna sources only) 4. (Does not apply) Program name (if broadcast) 5. Signal Type Being Received. Possible: On antenna sources or VIDEO composite or S-VIDEO jacks: 480i On component jacks: 480i, 480p, 720p, 1080i Signal Type Being Received. Possible: On antenna sources: SD 4:3, SD 16:9, HD On HDMI: 480i, 480p, 720p, 1080i, 1080p, all supported PC resolutions 6. Screen Format in use. Possible: Analog 480i /480p signals: Standard, Expand, Zoom, Stretch, Stretch Plus, Narrow 720p/1080i signals: Standard, Wide Expand, Zoom Screen Format in Use. Possible: SD 4:3, 480i, or 480p: Standard, Expand, Zoom, Stretch, Stretch Plus, Narrow SD 16:9 or HD 16:9, 720p, or 1080i: Standard, Wide Expand, Zoom 1080p: Standard, Wide Expand, Zoom 7. Current Fav bank number of channel...

Este manual também é adequado para os modelos :
TV - WD-60735 (2.67 mb)
TV - WD-60735 (2.67 mb)
TV - WD-65735 (2.67 mb)
TV - WD-65736 (2.67 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias