Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
These jacks allow you to send left and right analog audio from your computer to the TV. 9. IEEE 1394/DTVLINK™ These jacks allow the TV to connect to external IEEE 1394 digital products by means of a single cable. See chapter 6, “NetCommand Operations” for detailed information regarding IEEE 1394 connections and recording. 10. MONITOR OUT Use these composite video and left/right audio jacks to send analog video and audio signals to an external recording device such as a VCR. To make recordings from this output, the TV must be in normal full-screen mode rather than in Split Screen mode. • You can watch another device while recording, but not another channel. • From this output you can record audio and video signals from ANT 1, ANT 2, INPUT 1-3, and IEEE 1394 devices. • Digital signals from ANT 1, ANT 2, and IEEE 1394 devices are converted to analog video and audio signals. • Some signals cannot be recorded because of copy-protection flags in the content. 11. AUDIO OUT LEFT/RIGHT AUDIO OUT LEFT/RIGHT jacks send analog audio of the program currently shown on the screen to an A/V surround sound receiver or stereo system. Digital audio from digital channels, FireWire® (IEEE 1394/DTVLink) devices and HDMI devices is converted to analog audio by the TV. If using an analog A/V receiver or stereo system, this is the only audio connection needed between it and the TV. 12. DIGITAL AUDIO OUT This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Analog audio from analog channels and devices is converted by the TV to PCM digital audio. If you have a digital A/V receiver, in most cases this is the only audio connection needed between the TV and your A/V receiver. 13. IR Emitter NetCommand® IR Emitters connected to this jack are used by the TV’s NetCommand system to control external IR remote controlled analog devices such as cable boxes, VCRs, DVDs, satellite receivers and audio receivers. This system also coordinates with the TV Guide On Screen® system to control cable boxes and to activate the record feature of your VCR. Chapter 1. Television Overview CableCARD™ Technology CableCARD is a nationwide system standard that allows your local cable TV provider to supply you with an access card customized to your account. This card allows your TV to receive, decode, and unscramble the premium digital channels included in your cable TV subscription without the use of a cable box. When you move to a new cable provider’s area, return the CableCARD to the original cable provider and get a new card from your new provider. Please note that CableCARD is a relatively new technology and your local cable provider may not currently be offering this service. As time passes, this system will become broadly supported by most cable providers. The CableCARD system is unidirectional, meaning your cable provider can send updates to the TV, but the TV cannot send signals back. As a result, certain advanced and interactive digital cable services, such as requests for video-on-demand and pay-per-view programs, a cable operator’s enhanced program guide, and data-enhanced television services may require use of a set-top box instead. For more information, call your local cable operator. Digital cable channels authorized by the CableCARD are available on the Firewire® IEEE 1394 network and can be shared by other products on the network. You may be unable to record or copy some digital programs, however, because of copy restrictions set by the content or copyright owners. Using a CableCARD™ Power on the TV and insert the CableCARD into the CableCARD slot with the top of the card oriented as indicated by CARD TOP . When the initial screen displays, write down the information that appears and have it ready when calling your cable provider. In order to start cable service for this device, please contact your cable provider 1-800-xxx-xxxx CableCARD(tm): xxx-xxx-xxx-xxx-xxx-x Host: xxx-xxx-xxx-xxx-x Data: xxx-xxx-xxx-xx UnitAddress: xx-xxxxx-xxxxx-xxx Press EXIT to exit. Sample CableCARD initial screen. Record the information before contacting your cable provider. To review the information later, press MENU and when the Main menu appears, press 9 9 9 to re-display the screen. Note: CableCARD™ requires the TV’s Fast Power On setting. If you insert a CableCARD™, the TV will automatically override a Low Power setting and change to the Fast Power On setting. CableCARD™ Menu Press ENTER to select an application. Press EXIT key to exit. CableCARD menu Network Setup CableCARD(tm) Status CableCARD(tm) Pairing Conditional Access Sample CableCARD menu To display the CableCARD menu with links to applications from your cable provider: 1. While watching CableCARD, press INPUT to open the Input Selection menu. 2. With the CableCARD icon highlighted, press MENU to open the CableCARD menu. 3. Press to highlight a link (blue text), then press ENTER to access the linked page. 4. To redisplay the CableCARD menu, repeat steps 1 and 2....
Este manual também é adequado para os modelos :TV - WD-57732 (6.35 mb)
TV - WD-57732 (6.35 mb)
TV - WD-73732 (6.35 mb)
TV - WD-Y57 (6.35 mb)