Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
Follow the connections shown below. Set the unit to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels. Incoming 75 ohm CABLE TV Cable 75 ohm Cable to unit RF IN jack Converter/ Descrambler 75 ohm Coaxial Cable RF IN jack FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED PREMIUM CHANNELS If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your unit. With the switch in the “A” position, tune your unit to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to tune scrambled channels. Splitter B A Incoming 75 ohm CABLE TV Cable A/B Switch 75 ohm Cable to unit Converter/ Descrambler RF IN jack ENGLISH 9 Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only. To connect the TV to a VCR AUDIO/VIDEO cord (not supplied) To AUDIO/VIDEO OUT To AUDIO/VIDEO IN To connect the TV to a VCR with an S-Video cord If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the TV, you must also connect the audio cords to the AUDIO IN jacks on the rear of the TV. The S-VIDEO cord only carries the video signal. The audio signal is separate. Rear of the TV To S-VIDEO OUT To AUDIO OUT AUDIO cord (not supplied) S-VIDEO cord (not supplied) To AUDIO IN To S-VIDEO IN NOTE: When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord takes precedence over the video cord. To connect the TV to a DVD player /Satellite receiver If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown. Rear of the TV To S-VIDEO OUT AUDIO cord (not supplied) To AUDIO OUT To AUDIO IN S-VIDEO cord (not supplied) To S-VIDEO IN Rear of the TV Connections to other equipment (continued) To connect the TV to a DVD player with component video If your DVD player has component video out jacks, connect your TV to a DVD player using a component video cord. It can greatly enhance picture quality and performance. To AUDIO OUT YPBPRTo COMPONENT OUT AUDIO cord (not supplied) VIDEO cord (not supplied) To AUDIO IN To COMPONENT IN Rear of the TV NOTE: This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, “COMPONENT” and “NO SIGNAL OR NOT SUPPORTED VIDEO RESOLUTION” will be displayed on a black screen. If this screen appears, set the digital device’s component output to 480i. To connect the TV to a set-top box If you connect a set-top box, connect your TV to it by using a component video cord. To AUDIO OUT NOTE: To COMPONENT OUT AUDIO cord (not supplied) VIDEO cord (not supplied) To AUDIO IN Rear of the TV To COMPONENT IN This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component video outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, “COMPONENT” and “NO SIGNAL OR NOT SUPPORTED VIDEO RESOLUTION” will be displayed on a black screen. If this screen appears, set the digital device’s component output to 480i. To connect an audio system AUDIO cord (not supplied) Amplifier To AUDIO IN Rear of the TV ENGLISH To AUDIO OUT 11 Connections to other equipment (continued) To connect the TV to a camcorder To playback from a camcorder, connect the camcorder to the TV as shown. Front of the TV To AUDIO/VIDEO OUT AUDIO/VIDEO cord (not supplied) To connect the TV to a Game The TV can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You’ll need to consult each component’s Owner’s Manual for additional information. Front of the TV TV GAME AUDIO/VIDEO cord (not supplied) To AUDIO/VIDEO OUT Selecting the VIDEO input source Press TV/AV to view a signal from another device connected to your TV, such as a VCR or DVD player. You can select “ANALOG”, “DIGITAL”, “VIDEO1”, “VIDEO2” (on the front panel), or “COMPONENT” depending on which input jacks yo...
Este manual também é adequado para os modelos :TV - 206-3923 (1.41 mb)
TV - C27H26B (1.41 mb)