N N The aerial must be connected in order to set the time automatically. – – Manual: Set the current time manually. N N Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Date and Time. N N Available only when Clock Mode is set to Manual. N N You can set the Date and Time directly by pressing the number buttons on the remote control. Time Zone (depending on the country): Select your time zone. N N This function is only available when the Clock Mode is set to Auto. N N When selecting Manual in Time Zone, GMT and DST will be activated. . . Using the Sleep Timer O O MENUm > System > Time > Sleep Timer > ENTERE . . Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). N N To cancel Sleep Timer, select Off. . . Setting the On / Off Timer O O MENUm > System > Time > On Timer Off Timer > ENTERE . . On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. – – Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. N N The c mark indicates the day you’ve selected. – – Time: Set the hour and minute. – – Volume: Set the desired volume level. – – Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) – – Aerial (when the Source is set to TV): Select ATV or DTV. – – Channel (when the Source is set to TV): Select the desired channel. – – Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. N N NOTE . . If there is no music file on the USB device or the folder containing a music file is not selected, the timer function does not operate correctly. . . When there is only one photo file in the USB device, the slide show will not play. . . If a folder name is too long, the folder cannot be selected. . . Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. . . It is recommended that you use a USB memory stick and a multi card reader when using On Timer. . . The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized. . . Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. N N The c mark indicates the day you’ve selected. Time: Set the hour and minute. . . Locking ...
)
