Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Issues Solutions and Explanations There is a plastic smell from the TV. . . This smell is normal and will dissipate over time. The TV Signal Information is unavailable in the Self Diagnosis Test menu. . . This function is only available with digital channels from an Aerial / RF / Coax connection. TV is tilted to the right or left side. . . Remove the stand base from the TV and reassemble it. There are difficulties assembling the stand base. . . Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetized screw driver. Issues Solutions and Explanations The Channel menu is grey out (unavailable). . . The Channel menu is only available when the TV source is selected. Your settings are lost after 30 minutes or every time the TV is turned off. . . If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Setup (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU > System > Setup (Initial setup) > ENTERE. You have intermittent loss of audio or video. . . Check the cable connections and reconnect them. . . Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. Issues Solutions and Explanations You see small particles when you look closely at the edge of the frame of the TV. . . This is part of the product’s design and is not a defect. The PIP menu is not available. . . PIP functionality is only available when you are using a HDMI or components source. LCD 420 does not support AV, Component mode You turned the TV off 45 minutes ago, and it turned on again. . . It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. The message “Scrambled Signal” or “Weak or No Signal” appears. . . If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. . . If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. Issues Solutions and Explanations There are recurrent picture/sound issues. . . Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. . . To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. The message “This file may not be playable properly.” appears. . . This may appear because of high bit rate of content. Content generally will play but could experience some playability issue. . . Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under license from SRS Labs, Inc. SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, ...
Este manual também é adequado para os modelos :TV - LA32E420E2W (2.08 mb)
TV - UA22ES5000W (2.08 mb)
TV - UA26EH4000W (2.08 mb)
TV - UA32EH4000W (2.08 mb)