Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
The product is not powered off completely unless it is physically unplugged. e Standby indicator and remote control sensor. 1 2 3 4 6 7 8 9 10 1314 17 19 20 18 15 16 21 12 11 5 a (Standby-On) • Switches the TV to standby if it is on. • Switches on the TV if it is in standby. b MENU Toggles the main menu on or off. c TELETEXT (Not Used) Toggles teletex t on or off. d SOURCE Selects connected devices. English EN 5 e SLEEP s DEMO Sets a delay after which the TV switches Toggles the demonstration menu on or to standby. off. f OPTIONS t FORMAT Accesses options relating to the current Selects a picture format. activity or selection. u INCR. SURR g OK Enables Incredible Surround for stereo Confirms an entry or selection and sources. Enables spatial mode for mono displays the channel grid, when watching sources. TV. h (Navigation buttons) Remote control usage Navigates menus. When using the remote control, hold it close INFO to the TV and point it at the remote control Displays program information, if available. sensor. Make sure that the line-of-sight between the remote control and TV is not i j (Mute) blocked by furniture, walls or other objects. Mutes or restores volume. k CH +/- (CHANNEL +/ -) Switches to the next or previous channel. When the TV menu is on, this functions as Page Up/Down. ~30. l 0-9 (Numeric buttons) Selects a channel or setting. m PICTURE (Smart picture) Launches the picture menu. n SOUND (Smart Sound) Launches the sound menu. o +/ Increases or decreases volume. p BACK A/CH • Returns to a previous screen. • Toggles between the current channel and the last viewed channel. q BROWSE Switches between channel grid and program list. r DUAL Switches Stereo and Nicam Stereo to Mono. Selects first language (Dual I) or second language (Dual II) in bilingual programs. ~5m 6 EN 4 Use your TV This section helps you perform basic TV operations (see ‘Use more of your TV’ on page 9). Switch your TV on/off or to standby To switch on • If the standby indicator is off, press (Power) at the side of the TV. • If the standby indicator is red, press (Standby-On) on the remote control. To switch to standby • Press (Standby-On) on the remote control. » The standby indicator switches to red. To switch off • Press (Power) at the side of the TV. » The standby indicator switches off. Tip • Though your T V consumes ver y little power when in standby, energy continues to beconsumed. When not in use for an ex tended period of time, disconnect the T V power cablefrom the power outlet. Switch channels • Press CH +/- on the remote control or P/CH +/- on the side of the TV. • Enter a channel number using the Numeric buttons. • Press OK to use the channel grid. • Press BACK A/CH on the remote control to return to the previous channel. Note • When you use a favourite list, you can only select those channels in the list (see ‘Select a favorite list’ on page 12). Switch channels with the channel grid The channel grid allows you to view all available channels in a grid format. 1 Press OK. » The channel grid appears. 23 Press to browse the channel grid. Press OK to select a channel. English EN 7 Watch connected devices Note • Switch on the device before selecting it as a source on the T V. Use the source button Adjust TV volume To increase or decrease volume • Press +/-. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound. 8 EN 5 Use more of your TV Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 Press MENU. » The menu screen appears. Watch TV Add new device Setup 2 Press to select and navigate through one of the following menus. • [Watch TV]: Switches back to the antenna source if another source is selected. • [Add new device]: Adds new devices to the home menu. • [Setup]: Accesses menus to change picture, sound and other settings. 3 Press OK to confirm your choice. 4 Press MENU to exit. Tip • Af ter selecting [Add new device], follow the on-screen instructions to select the correct device and connector. Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. 1 Press MENU. 2 Press to select a device to remove. 3 Press OPTIONS. » The [Remove device] list appears. 4 Press OK, then select [Remove] to remove the device. » The selected device is removed from the home menu. Change picture and sound settings Change picture and sound settings to suit your preferences.You can apply pre-defined settings or change settings manually. Use smart picture Use smar t picture to apply pre-defined picture settings. 1 Press PICTURE. » The [Smart picture] menu appears. 2 Press to select from the following smar t picture settings: • [Personal]: Lists customized picture settings. • [Vivid]: Applies rich and dynamic settings. • [Standard]: Adjusts picture settings to suit most environments and types of video. • [Movie]: Applies settings for movie viewing. • [Game]: Applies settings for games. • [Energy s...