Assessments - 3, GPA: 4.3 ( )

Fabricante : Sony Arquivo Tamanho: 3.21 mb Arquivo Nome : Língua de Ensino:

Fotos e especificações  Sony  KDL-32EX725

por este dispositivo também tem outras instruções :

TV - KDL-32EX725 (3.41 mb)

TV - KDL-32EX725 (28.48 mb)

TV - KDL-32EX725 (1.18 mb)

TV - KDL-32EX725 (1.17 mb)

4 Follow the instructions on the set-up screen. ~ • Security key (WEP or WPA key) will not be required because you do not need to select any security method in this procedure. Type 4: Wired network set-up Enter the respective alphanumeric values for your router if necessary. The items that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or router. For details, refer to the instruction manuals provided by your Internet service provider, or those supplied with the router. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “Wired Set-up”. 3 Select “Auto” to set the IP Address and proxy server automatically, or “Custom” to set them manually. 4 Follow the instructions on the set-up screen. Viewing the network status You can confirm your network status. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “View Network Status”. If you cannot connect to the Internet Use the diagnosis to check possible causes for network connection failures, and settings. 1 Press HOME, then select > “Network” > “Network Set-up”. 2 Select “View Network Status”. 3 Select “Check Connection”. This may take a several minutes. You cannot cancel the diagnosis after selecting “Check Connection”. Adjusting the server display settings You can select home network servers to be displayed on the Home Menu. Up to 10 servers can be displayed in the Home Menu automatically. 1 Press HOME, then select > “Network” > “Home Network Setup”. 2 Select “Server Display Settings”. 3 Select the server you want to display on the Home Menu, and adjust the settings. If you cannot connect to your home network The TV detects if the server is being correctly recognised when you cannot connect it to your home network. If the diagnostic results indicate a failure, check possible causes, and network connections and settings. 1 Press HOME, then select > “Network” > “Home Network Setup”. 2 Select “Server Diagnostics”. The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears. 24 GB Additional Information Additional Information When the 1 (standby) indicator is flashing, count how many times it flashes (interval time is three seconds). Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing, check the items in the tables as follows. Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by qualified service personnel. Condition Explanation/Solution There is no picture (screen • Check the antenna (aerial)/cable connection. is dark) and no sound. • Connect the TV to the AC power (mains), and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1. Tiny black points and/or • The screen is composed of pixels. Tiny black points and/or bright bright points appe...

Baixe o seu

Para fazer o download, introduza 2 dígitos :