Log:
Assessments - 2, GPA: 3.5 ( )

Instruções de Operação Sony, Modelo KDL-46EX725

Fabricante : Sony
Arquivo Tamanho: 3.21 mb
Arquivo Nome :
Língua de Ensino: en
Fotos e especificações  Sony  KDL-46EX725
Ir para baixar



por este dispositivo também tem outras instruções :
TV - KDL-46EX725 (3.41 mb)
TV - KDL-46EX725 (3.43 mb)
TV - KDL-46EX725 (28.48 mb)
TV - KDL-46EX725 (1.18 mb)

Facilidade de uso


Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. ~ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. • Be sure the TV is on the vertical position before switching on. TV set must not powered on with LCD panel face down to avoid uneven picture uniformity. B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-46/40/32CX52x, KDL-32EX42x Getting Started Soft cloth (Continued) 9 GB B B Soft cloth 2: Adjusting the viewing angle of the TV This TV can be adjusted within the angles as illustrated. Angle adjustment (Swivel) (except KDL-26/24/22EX32x) ~ • When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over. 20° 20° 20° 20° Angle adjustment (Tilt) (except KDL-46/40/32CX52x) ~ • Be careful not to pinch your fingers between the TV and stand when adjusting the angle. B For KDL-55/46/40/37/32EX72x, KDL-46/40HX72x, KDL-46/40/37/32EX52x, KDL-32EX42x 0° -6° B For KDL-26/24/22EX32x 0° - 6° 10 GB ~ ~ Ensure that there are no objects in front of the TV. IR Sensor 3D Sync Transmitter (KDL-55/46/40/37/32EX72x, KDL-46/40HX72x only) Presence Sensor • Do not expose the Presence Sensor to direct sunlight or other strong light, as malfunction may occur. 3: Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART Getting Started Set Top Box/recorder (e.g. DVD recorder) ~ • Right Angle Type Universal SCART Lead is recommended for this connection. • Screw the satellite connector softly with hand, do not use any tool. • TV must be switched off when connecting satellite antenna (aerial). (Continued) 11 GB Connecting a Set Top Box/recorder Connecting a Set Top Box/recorder DVD recorder) with HDMI 4: Connecting audio/video Set Top Box/recorder (e.g. DVD recorder) Recommendation of the F type plug The one based on the following drawing is recommended about the F type plug. Projection of the inner wire from the connection part must be less than 1.5 mm. 1.5 mm max. (Reference drawing of the F type plug) devices Audio/video device 12 GB 13 GB Getting Started 5: Preventing the TV from toppling over 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M4, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord (not supplied). The length of the M4 machine screw differs depending on the cord diameter. Please refer to below illustration. 6: Organising the AC power cord (mains lead)/ Bundling the cables B KDL-46/40/32CX52x B Except KDL-46/40/32CX52x ~ • Before bundling the cables, remove th...

Este manual também é adequado para os modelos :
TV - KDL-32CX525 (3.21 mb)
TV - KDL-46CX525 (3.21 mb)
TV - KDL-40CX525 (3.21 mb)
TV - KDL-32EX725 (3.21 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias