Assessments - 5, GPA: 4.4
(
)
)
|
Fotos e especificações Star Trac E-RB |
Facilidade de uso
Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac. Every effort has been made to keep this information current; however, periodically, changes are made to the information herein, and these changes will be incorporated into new editions of this publication. All product names and logos are trademarks of their respective owners. Printed in the USA. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION E & S TBT, RB, and UB E & S TR STAR TRAC UNIVERSAL TV BRACKET INSTALLATION ABOUT THIS MANUAL This manual is applicable to the STAR TRAC E-Series & S-Series Products. The manual is divided into eight sections, as follows: Introduction Provides an overview of each section within the manual. Before You Get Started Provides guidelines to help you have a successful installation. Warnings and Cautions Helpful safety tips to keep you out of harms way. Installing Your STAR TRAC Universal TV Bracket Provides a step-by-step instruction set for installing your TV bracket on the E-series and S-series products STAR TRAC UNIVERSAL TV BRACKET INSTALLATION CHECK FACILITIES PREPAREDNESS For a proper installation, please read this guide thoroughly and follow the instructions. Star Trac’s goal is to help you have a successful and reliable installation, for this reason we have come up with some helpful tips and check list to accomplish this goal. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION CAUTION: Disconnect power before doing any installation. Required Tool for Installation Supplied: · 5MM Hex Allen Key · 3MM Hex Allen Key · #2 Phillips Screwdriver · Flat Screwdriver STAR TRAC UNIVERSAL TV BRACKET INSTALLATION INSTALLING YOUR UNIVERSAL TV BRACKET KIT INSTALLING YOUR UNIVERSAL TV BRACKET KIT The Star Trac Universal PVS Kit is different for each of your Star Trac E or S Series Cardio products. Make sure you have the proper kit for the E or S Series product you are installing. The E- & S-UB, E- & S-RB, E- & S-TBT, and E- & S-ST will follow the same basic steps for installation. To install the TV neck on the E-UB, E-RB, and E-TBT, and follow these steps: STEP1 Using a #2 Phillips screwdriver, to remove the (8) screws on the back of the display plastic. Set the screws aside, you will need them for reassembly. STEP2 After the screws have been removed, carefully open the display plastic, so as to not detach the inner cables from the display. Disconnect the ground wire between the Heart Rate board and the display mount. STEP3 Disconnect the 12-pin serial connector and the Heart Rate cable from the display. After all the cable/harnessing has been disconnected, place the front display plastics aside for later use. Be careful with the display and place it face down on top of a non-scratching surface. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION STEP4 Remove the cap cover with the Star Trac logo from the plastics by removing the (2) screws using a #2 Phillips screwdriver....
Este manual também é adequado para os modelos :Formadores - S-RB (314.88 kb)
Formadores - S-TBT (314.88 kb)
Formadores - S-UB (314.88 kb)