Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Be sure to read your Owner’s Guide before using your new Fitness Bike. If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12 NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Fitness Bike to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely tightening any ONE screw. 1STEP2STEP4STEP5STEP3STEP TOOLS & PARTS INCLUDED 15mm Pedal Wrench 5mm T-Shaped Wrench Screwdriver 5mm L-Shaped Wrench 4mm L-Shaped Wrench PARTS BOX Console Mast Cover Pedals Seat Rail Cover Tension Knob and bracket (R2000 ONLY) Water Bottle & Cage Warter Bottle Bracket (R2000 ONLY) Power Supply (R2100 ONLY) Color-coded Hardware Bags Owner’s Guide Assembly Guide Warranty Card HARDWARE INCLUDED BLUE BAG ORANGE BAG GREEN BAG M8 x 15L Screw Quantity: 4 M8 Lockwasher Quantity: 4 M5 x 65L Screw Quantity: 1 (R2000 ONLY) M8 x 15L Screws Quantity: 5 M8 Lockwashers Quantity: 4 M5x35L CapScrew Quantity: 2 (R2000 ONLY) M6 x 35L Screws Quantity: 8M8 x 15L Screw Quantity: 3 M8 Lockwasher Quantity: 3 M8 x 15L Screw Quantity: 4 M8 Lockwasher Quantity: 4 M6 Arc Washer Quantity: 8 M5 Washer Quantity: 1 (R2000 ONLY) M5 x 10L Screws Quantity: 1 PINK BAG Rubber Stopper Quantity: 1 1STEP• Attach the rear support to the seat rail with four screws (M8x15) and four lock washers (M8). Tighten with the 5mm T-shaped wrench. • Slide the seat frame onto the seat rail. Make sure the flat side of the clamp block rests against the bottom of the seat rail. • Insert the heart rate wires located under the seat frame through the hole on the bottom of the seat rail and push them toward the front of the rail. Take the end of the heart rate wires that runs through the seat rail and insert them through the hole in the bracket at the end of the rail. Snap the wire grip around the end of the heart rate wires and slide it into place on the bracket. • Attach the rubber stopper to the bot- tom of the seat rail with the (M5x10) screw. ORANGE BAG 1STEPCORRECT INCORRECT Seat Frame Seat Rail Rail Support Wire Grip • Attach the rear support to the seat rail with four screws (M8x15) and four lock washers (M8). Tighten with the 5mm T-shaped wrench. • Slide the seat frame onto the seat rail. Make sure the flat side of the clamp block rests against the bottom of the seat rail. • Insert the heart rate wires located under the seat frame through the hole on the bottom of the seat rail and push them toward the front of the rail. Take the end of the heart rate wires that runs through the seat rail and insert them through the hole in the bracket at the end of the rail. Snap the wire grip around the end of the heart rate wires and slide it into place on the bracket. • Attach the rubber stopper to the bot- tom of the seat rail with the (M5x10) screw. ORANGE BAG 1STEPCORRECT INCORRECT Seat Frame Seat Rail Rail Support Wire Grip 5 2STEP• Slide the seat rail sleeve onto the seat rail. • Connect the heart rate wires com- ing from the seat rail to the heart rate wires coming from the seat frame bracket. Tuck the excess wire under the seat frame bracket. • Slide the seat rail onto the seat rail bracket. Secure with three screws (M8x15) and three lock washers (M8). Tighten with the 5mm T-shaped wrench. • Slide the seat rail sleeve into posi- tion at the front of the seat rail. BLUE BAG • Slide the seat rail sleeve onto the seat rail. • Connect the heart rate wires com- ing from the seat rail to the heart rate wires coming from the seat frame bracket. Tuck the excess wire under the seat frame bracket. • ...
Este manual também é adequado para os modelos :Formadores - R2100 (985.63 kb)