Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
in the Site Recovery Manager. Configuring HP StoreVirtual Storage arrays in the Site Recovery
Manager requires the following:
•
The IP addresses of the HP StoreVirtual Storage managers. More than two addresses can be
entered by using a comma or semicolon separator.
•
The same user name and password in each site. This is the administrative user name and
password configured in the CMC.
The user at the recovery site must have full permissions on the management group but can be
limited to read only on all other permissions.
Installing HP StoreVirtual Application Aware Snapshot Manager (optional)
Install and configure the Application Aware Snapshot Manager on both Primary and Remote site
vCenter servers. For installation instructions, see the HP StoreVirtual Storage Application Aware
Snapshot Manager Deployment Guide
The replication schedule controls the application aware snapshot integration. If the schedule has
managed enabled, that enables the application managed snapshot integration, where the HP
StoreVirtual SRA takes managed snapshots in syncOnce and reports to the Site Recovery Manager
the recovery points with VM snapshots using VmImageConsistencyEnabled flag. If the schedule
has managed disabled, that disables the application managed snapshot integration, as no managed
snapshots are taken. Exceptions: the HP StoreVirtual SRA can handle any changes in configuration,
but this is a normal, baseline scenario.
How the HP StoreVirtual SRA works with Site Recovery Manager 5.x
The HP StoreVirtual SRA has three primary functions for the Site Recovery Manager:
•
Test Failover—A Test scenario that checks failover conditions and parameters. This will create
temporary writable sources at the Backup Site. In the case of HP StoreVirtual Storage,
SmartClone volumes will be created.
•
Failover—Transitioning production services from a Primary Site to a Backup Site, with the
Primary Site either available or not available.
•
Reprotect—After a Failover, planned or unplanned, transitioning production services from the
Backup Site to the Primary Site. This entails reversing Replication, so that Replication goes
from Backup to Primary Site, doing a Failover in Reverse, and then reversing Replication again
so that replication goes from the Primary to Backup Site.
These functions each depend on specific configuration information in a HP StoreVirtual Storage
management group.
Array and volume discovery
The Site Recovery Manager gets information from the HP StoreVirtual SRA about what volumes
are being replicated by the LeftHand OS software. The Site Recovery Manager then compares
that list to the volumes it recognizes in a VMware environment.
For normal Site Recovery Manager operation, a replicated volume needs to have a Remote Copy
schedule with completed remote copies in a different HP StoreVirtual Storage management group
to a remote volume that is not mounted at the remote site. This is a standard HP StoreVirtual Storage
Remote Copy configuration.
For instructions on how to configure Remote Copy schedules, see the HP StoreVirtual Storage
Remote Copy User Guide. The latest version of this document can be found at: http://www.hp.com/
support/StoreVirtualManuals. The same information is available from the HP StoreVirtual Storage
Online Help in the HP StoreVirtual Centralized Management Console.
Installing HP StoreVirtual Application Aware Snapshot Manager (optional)
5
... Este manual também é adequado para os modelos :
dados de dispositivos de processamento - HP StoreVirtual 4130 600GB SAS Storage (395.73 kb)
dados de dispositivos de processamento - HP StoreVirtual 4330 1TB MDL China SAS Storage (395.73 kb)
dados de dispositivos de processamento - HP StoreVirtual 4330 1TB MDL SAS Storage (395.73 kb)
dados de dispositivos de processamento - HP StoreVirtual 4330 1TB MDL SAS Storage/S-Buy (395.73 kb)