Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
To clean the Soleplate: 1.Allow the iron to cool and then wipe it with a soft, damp cloth. WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate. This will damage the finish. 2.Run the iron over an all-cotton cloth to remove any residue. USING THE SELF-CLEANING FEATURE You should use the Self-Cleaning feature once a month to maintain the optimal performance of your iron. To use the Self-Cleaning feature: 1. Move the Steam Lever back and forth from O/Off (Dry) several times to remove debris and minerals from the Steam Valve. This keeps water flowing into the steam chamber. 2.Fill the water reservoir with tap water to the MAX line. 3.Set the Fabric Select Slide to LINEN. 4.Plug the iron into a power outlet and allow the iron to heat for 2 minutes. 5.Turn the Fabric Select Slide to MIN and unplug the iron. 6.Hold the iron over a sink in a horizontal position. WARNING: Be careful not to touch the iron’s hot surfaces. 7.Press the self-clean button and hold. Water will begin dripping from the steam vents. To make sure that all of the water is removed from the tank, slowly rock the iron side to side and front to back for 30 seconds. When rocking the iron, dip the nose of the iron slightly below the rear of the iron to make certain the water circulates completely. Release self-clean button after one minute. 8.Turn the iron upside down and allow the remaining water to flow out of the fill hole. 9.Dry the soleplate with a towel. 10.Plug in the iron and set the Fabric Select Slide to Linen. Let the iron heat for 2 minutes to dry out the iron completely. 11.Set the Fabric Select Slide to MIN, unplug the iron and allow it to cool. IRONING TIPS • Always read garment labels and follow the manufacturer’s ironing instructions. • Sort the articles to be ironed according to the type of fabric. • You should first iron garments requiring low temperature (e.g., silks and synthetics) to avoid damaging them with an iron that is too hot. • If you are unsure of the fabric content of the garment, test a small area, such as a seam or facing, before ironing a visible area. Start with a low temperature and gradually increase the heat to find the best setting. • When changing the temperature from a high setting to a low setting, allow approximately 5 minutes for the lower temperature to be reached. • When steam ironing, use long, slow passes over the fabric. This will allow the steam to penetrate the fabric while allowing the heat of the soleplate to dry out the moisture. • To iron linens, turn garment inside out. Be careful not to use an iron that is too hot because the lining may melt or stick to the soleplate. • To iron zippers, use an ironing cloth or make sure the zipper is closed and iron over the flap. Never iron directly over an unprotected zipper. • Use the Ironing Guide to select the best setting and method for the fabric you plan to iron. 1 Year Limited Warranty Sunbeam Products, Inc, or if in Canada, Sunbeam Corporation (Canada) Limited (collectively “Sunbeam”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Sunbeam® dealers, service centers, or retail stores selling Sunbeam® products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than Sunbeam or an authorized Sunbeam® service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes. What are the limits on Sunbeam’s Liability? Sunbeam shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. Sunbeam disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product includin...
Este manual também é adequado para os modelos :Irons - 3965 (114.63 kb)
Irons - 3966 (114.63 kb)