Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Turn the fabric selector to off. Slide the steam selector to off ( ). b. Unplug the appliance (Do not hold iron while unplugging or the Lifters will not stay extended. Iron should always be stored with Lifters extended to prevent leaking). c. Place iron on the Lifters and allow to cool. d. Important: Empty water from the water tank after use. Tilt the iron forward to drain from the spout at the front of the iron. To drain faster, open the Flip Funnel™ . e. For easy storage, the power cord can be wound loosely around the iron once it has cooled. maintenance The soleplate should be cleaned if starch or other residue build up. When the iron is cool, wipe the soleplate with a soft, damp cloth. Do not use abrasive cleaners or scouring pads as this will damage the iron’s soleplate. Mineral deposits from tap water can occur in the soleplate vents. To clean, fill the water tank and heat the iron to the linen fabric setting. Once the iron is fully heated, unplug the iron and hold over a sink. Press the steam button repeatedly until water begins to drip out of the soleplate. Be careful, as this creates large amounts of steam. To ensure optimal steam production, the steam valve should be regularly cleared of accumulated debris and minerals. This is done by moving the steam selector back and forth from the off ( ) to the max ( ) steam settings several times. trouble shooting guide problem things to check solution fabric selector is set to off Turn the fabric selector knob to a fabric setting. iron does not heat iron not plugged in correctly Check to make sure the plug is fully plugged into the socket. auto shut-off system is activated touch the handle. Auto-Lift switch set to off Set the switch on the back of the iron to the on ( ) position. iron not plugged in correctly Check to make sure the plug is fully plugged into the socket. Lifters do not come out Move your hand away from the iron, and the Auto-Lift System will raise the sole-plate. handle activated The fabric selector must be set to the wool, cotton or linen settings to produce constant steam. iron is not hot enough Steam selector must be turned to a setting. steam selector set to off iron does not steam Move the steam selector from off ( ) to the max ( ) settings a few times to unclog. steam valve is clogged When the Auto-Lift switch is set to off ( ), always store the iron in the vertical position. We recommend turning on the Auto-Lift system to store the iron. Auto-Lift is off and iron is horizontal iron leaks Make sure the fabric selector knob is set to the cotton or linen range to ensure proper steam production. iron is not hot enough Allow 3 seconds between uses of the steam burst function. steam burst button is overused iron is emitting a brown or white substance Switch to either spring water or half tap/half distilled water mixture. See the “water tank” page for more information. water hardness may be too high One (1) Year Limited Warranty Oliso, Inc. warrants that for a period of one year from the date of the original purchase, this product will be free from defects in material and workmanship, when utilized for normal household use. Oliso, Inc. will repair or replace this product or any component of the product found to be defective during the warranty period without charge to the customer. If a replacement product is sent, it will carry the remaining warranty of the original product. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Oliso, Inc. dealers or retail stores selling Oliso, Inc. products do not have the right to alter, modify or in any way change the terms and conditions of this warranty. The liability of Oliso, Inc. is limited solely to the cost of repair or replacement of the product at its option. This warranty does not cover normal wear of parts and does not apply to any product that has been tampered with or used for commercial purposes. This warranty does not cover damage caused by misuse, abuse, use on improper voltage or current, use contrary to the operating instructions, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by Oliso, Inc. Further, the warranty does not cover Acts of God such as fire, flood, hurricanes, and tornados. This warranty is extended to the original purchaser of the product and excludes all other legal and/or conventional warranties. The responsibility of Oliso, Inc. is limi...
Este manual também é adequado para os modelos :Irons - TG-1000 (985.73 kb)