Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Maintain a minimum distance of 10 cm to avoid getting the fabric too damp. To remove fabric stains The steam gun can help to remove washable, fresh stains. The concentrator (18) and brush extension (19) supply a concentrated jet of steam that makes it possible to remove certain types of fabric stains • If the stain is not fresh, the garment should be washed in a washing machine or hand-washed according to the garment care label. • For stubborn or non-washable stains, take the garment to a specialist cleaning centre or dry cleaners. Use the concentrator (18) to direct the steam jet at the stain, in direction from the outer side of the garment into the fabric placing a sponge or cloth underneath it to absorb the dirt. The brush extension (19) can also be used with gentle action to support the cleaning effect. Intelligent steam (depending on model) This system has intelligent steam control, which, after releasing the steam release button (14), provides a small amount of additional steam. The additional steam can always be stopped by briefly pressing the steam release button once again. Auto shut-off (depending on the model) If during ironing the steam release button (14) on the handle of the iron is not pressed for a certain length of time (8 minutes), the steam station will automatically switch off. The “Auto shut-off” pilot lamp (6) will flash when auto shut off has been activated. To switch the steam station back on, press the steam release button again, and wait until the “Auto shut-off” pilot lamp remains lit continuously. Cleaning & Maintenance Always unplug the appliance from the mains supplybefore carrying out any cleaning or maintenanceoperation on it. 1. After ironing, pull out the plug and allow the appliance to cool down before cleaning. 2. Wipe the housing, handle and iron body with a damp cloth. 3. If the soleplate is soiled with dirt or scale, clean it with a damp cloth. 4. Never use abrasive products or solvents. Storing the appliance (D) 1. Always allow the applianc,5 Fabric protection soleplate cover (E) (depending on the model) The fabric-protection soleplate cover is used for steam- ironing delicate garments at maximum temperature without damaging them. Use of the soleplate cover also does away with the need for a cloth to prevent shine on dark materials. It is advisable to first iron a small section on the inside of the garment to see if it is suitable. To attach the soleplate cover to the iron, place the tip of the iron into the end of the soleplate cover and pull the elastic strap over the lower rear of the iron until it fits tightly. To release the soleplate cover, pull the elastic strap and remove the iron. en en The fabric-protection soleplate cover may be purchased from the customer service or specialist shops: Accessory code Name of accessory (After-sales) (Specialist outlets) 464846 TDZ2510 464745* TDZ2520* * Cork handle iron “Calc‘n clean” (F) Cleaning the Boiler To extend the life of your steam generator and to avoid a...
Este manual também é adequado para os modelos :Irons - TDS2549/01 (3.62 mb)
Irons - TDS2551(00) (3.62 mb)
Irons - TDS2551/01 (3.62 mb)
Irons - TDS2555/01 (3.62 mb)