Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
Important Safety Instructions .............. 2 Using Your Iron........................................ 5 Parts and Features.................................. 3 Caring for Your Iron................................ 6 Cord-Free Ironing .................................... 3 Troubleshooting ...................................... 6 Features .................................................... 4 Customer Assistance ............................ 7 For Customer Assistance Please Call: 1-877-207-0923 840096400 840096400 Ev02 6/18/02 10:18 AM Page 2 IMPORTANT SAFETY INSTRUCTIONS When using your flatiron, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING 1. Use iron only for its intended use. 2. To protect against risk of electric shock, do not immerse the iron, power base, cord or plug in water or other liquids. 3. The iron should always be turned to OFF before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 4. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around the cord wrap area when storing. 5. Always remove iron from the power base when filling with water or emptying. 6. Always disconnect base from electrical outlet when not in use. 7. Do not operate iron with a damaged cord or if the iron or power base has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer assistance number for information on examination, repair or electrical or mechanical adjustment. Incorrect reassembly can cause a risk of electric shock when the iron is used. 8. Close supervision is necessary for any appliance being used by or near children. Do not leave iron or power base unattended while connected or on an ironing board. 9. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir. SPECIAL INSTRUCTIONS 1. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 12-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS! Consumer Safety Information This product is intended for household plug. If the plug should still fail to fit, contact use only. a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety This appliance is equipped with a polarized purpose of the polarized plug by modifying plug. This type of plug has one blade wider the plug in any way. than the other. The plug will fit into an electrical outlet only one way. This is a safety Use the iron on an ironing board. Ironing on feature intended to help reduce the risk of any other surface may damage that surface. electrical shock. If you are unable to insert the plug into the outlet, try reversing the Before First Use • Steam vents should be cleaned before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. This will clean the vents. 2 • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. • During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. 840096400 Ev02 6/18/02 10:18 AM Page 3 Parts and Features Spray/Blast Buttons Adjustable Steam Switch Water Tank Opening Spray Nozzle Water Window Temperature Control Dial Soleplate Re-heat Light Heel Rest Power Base Reheating Light Power/Reset Light Button Cord Wrap 1 2 3 4 1 3 5 6 5 6 7 7 2 8 9 10 9 8 11 4 11 12 13 12 10 13 Cord-Free Ironing 1. Unwind power base cord and plug 3. Remove iron from base and begin base into electrical outlet. Place ironing fabric. power base on ironing board or NOTE: For best performance ALWAYS other surface suitable for ironing. place iron on power base when iron is 2. Set Temperature Control Dial to not in use, even if only for a few seconds. desired setting. Let the iron preheat 4. When finished ironing one section of for three minutes or until the 11 fabric, place iron back on base while Reheating Light goes off. repositioning fabric. Or if Re-heat 8Light comes on, place iron back on base to reheat. 3 840096400 Ev02 6/18/02 10:18 AM Page 4 Features Adjustable Steam Switch – This switch provides minimum steam for wool or maximum steam for linen. Set the switch to O to change to Dry Iron. Spray and Blast of Steam Buttons – Push Blast Button for an Blast Spray extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Reheating Light – This light comes on when the iron is drawing power from the base. The iron may be used even...
Este manual também é adequado para os modelos :Irons - 840096400 (182.15 kb)