Close the water inlet cover. 3 Plug in the iron. 4 Choose dry or steam ironing based on the type of fabric you are going to iron. For DRY ironing set the steam control dial to “0”. For STEAM ironing set to desired steam for the type of material to be ironed. 5 Set the desired fabric/temperature by pressing the Electronic Temperature Control on the top of the handle. 6 The temperature indicator light on the right side of the LED Display Panel will light up as the iron reaches the preset tem

Hold the iron in a vertical position several inches away from the articles and press the steam burst button or the X-Tended steam button several times to prime the pump. A CAUTION: Never iron or steam clothes while they are being worn. A CAUTION: Do not aim iron at yourself or anyone else while using the steam burst feature. Be careful, burns or serious injury may occur. A If the tank runs dry, always make sure you unplug the iron from the outlet before you refill. CO — H Electronic Auto-

Pivots up and down to prevent dragging along the fabric. The flexible cord cover protects the cord from fraying. 10 Fabric Setting Indicators 11 Temperature Indicators 12 Power Light 13 Auto-Off Light 14 Anti-Drip Function (not shown) Prevents water spitting when the iron temperature is too low. 15 Built-In Anti-Calcium Filter (not shown) Prevents calcium build-up which prolongs the life of the iron. This iron is for HOUSEHOLD USE ONLY. Plug it into any 120V AC polarized electrical outle

Make sure the plug is securely in the socket. Temperature setting might be too low. Try turning to a higher setting. An odor is being emitted from the new iron or small particles are coming out. This is normal. Follow the instructions for first-time use and allow iron to steam through 2-3 fillings and press the steam burst button occasionally to eliminate small white particles. Iron doesn’t steam. Water tank may be empty or water level is very low. Add water. Make sure the fabric/temperature s

Iron should be plugged into a 120V AC electric outlet only. Make sure the plug is securely in the socket. Temperature setting might be too low. Try turning to a higher setting. Water droplets coming from steam vents. Variable Steam Control Dial may be set in “self clean” position. Align the dial to the "0" to "Max" steam setting. Iron may not be hot enough. Set temperature to “MAX” position. Always allow iron sufficient time to heat up before activating the variable steam control. Overuse the st

1 Open the water inlet cover located on the front of the iron. 2 Holding the iron at a slight angle; fill the tank with the filling flask without going over the “MAX” line. Close the water inlet cover. 3 Plug in the iron. 4 Choose dry or steam ironing based on the type of fabric you are going to iron. For DRY ironing set the steam control dial to “0”. For STEAM ironing set to desired steam for the type of material to be ironed. 5 Set the desired fabric/temperature by pressing the Electronic Temp

STEAM IRONING1 Open the water filling inlet cover. Holding the iron at a slight angle, pour the water slowly into the inlet. The soleplate design allows for ordinary tap water to be used. We recommend using the mix of 50% tap water and 50% distilled water to reduce the hardness. 2 Using the filling flask, fill the tank to a desired level without going over the “MAX” line on the water tank. 3 When you’re finished, close the inlet cover before continuing. 4 Plug the cord into a polarized 120V AC e

Be careful, burns or serious injury may occur. CAUTION: Never iron or steam clothes while they are being worn. If the tank runs dry, always make sure you unplug the iron from the outlet before you refill. Self-CleaningSelecting suggest that you self-clean the iron at least once every two weeks to remove scale and calcium. If you know you have very hard water we recommend that you self-clean the iron more often. 1 Set the steam control lever to any steam position. 2 Fill the water tank up to the

Self cleaning feature flushes internal sole plate with water. 4. Anti-Drip Function Cuts off water when the iron temperature is too low. 8. Water Filling Inlet The cover prevents dust and foreign matter from entering the water tank. It also stops any water from spilling during ironing. 6. Stainless Steel Soleplate Provides maximum glide- ability and heat retention. 5. Built-In Anti-Calcium Filter Prevents calcium build- up and prolongs the life of the iron. 8 IRONING CHART NOTE: Always refer to

sharkcompany.com OWNER’S MANUALModel GI477/GI477R120V., 60 Hz., 1500 Watts Models GI477/GI477R Printed in China 10 Rev. 07/05IMPORTANT SAFETY INSTRUCTIONSWhen using your iron, basic safety precautions should always be followed, including the following: 1. Read all instructions carefully. 2. Use iron only for its intended use. 3. To protect against risk of electrical shock, do not immerse the iron in water or other liquids. 4. Never yank cord to disconnect from outlet. Grasp plug and pull to disc