Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
• To do this, use an original AEG activated charcoal filter (see Special accessories). • The air is discharged to the outside through a pipe, which must be fitted to connection flange A. Fig. 1. • For the extractor version this pipe must have a diameter of 150 mm. Should there already be a pipe of diameter 125 mm that ducts to the outside through the walls or roof, it is possible to use the 150/ 125 mm reduction flange provided. In this case the hood will be slightly more noisy. Filter version • The air is filtered through an activated charcoal filter and returned to the kitchen through the top grill of the outlet pipe. • When the hood is used in the filter version it must be fitted with an original AEG KF20 activated charcoal filter (see Special accessories). • Fix the deflector using two screws O 3.5x6.5 mm. Fig. 2. • Optionally, the position of the chimney elements can be changed. When using the hood in the filter version the chimney must be fixed at the top, with the air outlet grill at the side. 60 Fig. 2 A B C D E F G H I Hood Operation • Best results are obtained by using a low speed for normal conditions and high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking then you will get an underpressure in the kitchen. It should be left on after cooking for about 15 minutes or until all odours have disappeared. The control switches are located on the unit’s front panel: A: Main switch, hood on/off. B: Start and choice of motor speed 1-2-3-1-2......... C: Indicates speed 1 (LED). D: Indicates speed 2 (LED). E: Indicates speed 3 (LED). F: Indicates Intensive speed (LED). G: Intensive speed on/off. The Intensive speed runs for 5 minutes: - If the hood is on when the Intensive speed is activated, the hood revert to previous speed after 5 minutes. - If the hood is off when the Intensive speed is activated, the hood will automaticly be turned off after 5 minutes. To interrupt the Intensive speed, press button A or B. H: Light off. I: Light on. Should the hood or the controls fail to operate: disconnect the power supply for at least 5 seconds, then turn the hood back on again. Maintenance and care • The hood must always be disconnected from the mains power supply before beginning any maintenance work. Metal grease filter • The purpose of the grease filters is to aspirate grease particles which form during cooking and it must always be used, either in the external evacuation or internal recycling function. Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks. Open the metal grease filter • First, push the metal grease filter stop backwards, then extract the filter, pulling downwards. Fig. 3. Hand washing Soak grease filters for about one hour in hot water with a grease-loosening cleaner, then rinse off thoroughly with hot water. Repeat the process if necessary. Refit the grease filters when it are dry. Afb. 3 Dishwasher machine Place grease fi...
Este manual também é adequado para os modelos :Hobs - 3010 D (403.82 kb)
Hobs - 3000 D (403.82 kb)
Hobs - 3010 D (403.82 kb)
Hobs - 3000 D (403.82 kb)