Log:
Assessments - 5, GPA: 4.4 ( )

Instruções de Operação Bosch, Modelo GAS HOB 85600 G

Fabricante : Bosch
Arquivo Tamanho: 130.35 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


To do this, follow the procedure below. . + 1) Turn the gas tap to the MAX position and ignite. 2) Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below. Procedure: 1) Re-ignite the burner and set to + MIN. 2) Remove the control knob. 3) The adjustment screw is located down the centre of the gas tap control shaft. To adjust, use a thin bladed screwdriver and turn the adjustment screw until the flame is steady and does not extinguish, when the knob is turned from MIN to MAX. Repeat this procedure for all burners. Pressure Testing . + 1) Remove left hand pan support and front left burner cap and crown. 2) Fit manometer tube over the injector. 3) Turn on the burner gas supply and ignite another burner supply. The pressure reading should be nominally 20mbar and must be between 17 mbar and 25mbar. 4) Turn off the burner supplies. FO 1042 a) Minimum adjustment screw b) Tap Conversion from Natural Gas to LPG It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted. The gas rate is adjusted to suit. Method . + 1) Ensure that the gas taps are in the 'OFF' position 2) Isolate the hob from the electricity supply 3) Remove all pan supports, burner caps, rings, crowns and control knobs. 4) With the aid of a 7mm box spanner the burner injectors can then be unscrewed and replaced by the appropriate LPG injectors. TO ADJUST THE GAS RATE With the aid of a thin bladed screwdriver completely tighten down the by pass adjustment screw, which is located down the centre of the gas tap control shaft. Upon completion stick the replacement rating plate on the under side of the hob. IMPORTANT The replacement/conversion of the gas hob should only be undertaken by a competent person ...

Este manual também é adequado para os modelos :
Hobs - GAS HOB 84602 G (130.35 kb)
Hobs - GAS HOB 84602 G (130.35 kb)
Hobs - GAS HOB 84602 G (130.35 kb)
Hobs - GAS HOB 85600 G (130.35 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias