Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
The signal words shown below are used to alert you to potential personal injury and property damage hazards. There are three hazard classifications based on potentially dangerous situations. Obey all safety instructions that show these symbols to avoid possible injury, death and property damage. WARNING: WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION: CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. WARNING 1. a) b) TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. 2. To reduce the risk of fire or electric shock, do not use this product with any solid-state speed control device. 3. a) b) c) d) TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guidelines and safety standards such as those published by the National Fire Protection Association (NFPA), and The American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. Ducted fan must always be vented to outdoors. 4. TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. 5. This unit must be grounded. 6. Install this range hood to a liner. Check that the hood is correctly installed, since incorrect installation could result in the range hood becoming detached and falling off. 7. Connect only to an AC120 Volt power source or the range hood could result in fire, electric shock, and damage. CAUTION 1. For general ventilating use only. Do not use to exhaust hazardous or explosive material and vapors. 2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages. 3. Read specification label on this product for further information and requirements. 4. Use only for the purpose of kitchen ventilation. 5. Do not install this range hood in the bathroom or in other wet rooms since electrical shock and damage may result. 6. Fasten the filter and other parts securely. Incorrect attachment may result in personal injury or property damage. 7. Keep your hands and other objects away from the fan while it is in motion. The range hood may injure you or damage itself. : means prohibition. It indicates actions, if any, that mustn’t be done. : means forcible execution. It indicates actions, if any, that must be done. NOTE:The safety instructions are explained with the following pictographic symbols. NAME OF PARTS SIZE & DIMENSIONS (Unit : inch) - Accessories -- Accessories -- Accessories -- Accessories -- Accessories - Screw M5.30 Four (4) pieces Nut with plate Four (4) pieces NAME OF PARTS SIZE & DIMENSIONS (Unit : inch) - Accessories -- Accessories -- Accessories -- Accessories -- Accessories - Screw M5.30 Four (4) pieces Nut with plate Four (4) pieces RANGE HOOD LOCATION 1 1 The range hood must be installed just above the cooktop. 2 2 The minimum distance from the cooking surface to the bottom of the range hood must be 24". 3 3 The total weight of the BUF-01/BUF-02 range hood unit is: BUF-01/BUF-02 -----18 lbs. (8 kg) 4 4 Power requirements are: BUF-01 AC120 V, 60 Hz, 1.3 Amp BUF-02 AC120 V, 60 Hz, 2 Amp CAUTION • Check that the hood is correctly installed, since incorrect installation could result in the detachment of the range hood and the unit fall. • To protect hands from injury, wear working gloves when installing the range hood. 1.PREPARATIONWARNING• If the range hood is not installed properly, it could become detached and fall. • Ensure that the metal duct does not touch other metal housing materials, otherwise fire or electric shock could result. 1This range hood is designed to discharge upward. For vertical discharge, run duct work between the hood location and roof cap location. To get the best result, use a minimum number of transitions and elbows. Be sure to...
Este manual também é adequado para os modelos :Fans - BUF-01 (484.01 kb)