Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Contents For the User Important Safety Information Description of the Appliance Using the cooker hood Cooker Hood Controls To Operate Recirculation Extraction Maintenance and Cleaning External Cleaning Cleaning the Comfort panels Metal Grease Filters Charcoal Filters To Remove/Replace Charcoal Filter Changing the Halogen Spot Lamp Something Not Working Repairs and After Sales Service For the Installer 2 Electrical Connections 9 Electrical Requirements 9 4 Electrical Connection 9 10 Installing the Cooker Hood 5 10 Installation Requirements 5 10 Unpacking 5 10 Drilling the Ceiling/Support Shelf 6 10 Fixing the Frame 6 Extraction 7 12 Recirculation 8 12 Fitting the Chimney Stack 8 12 Fitting Hood body 8 12 13 14 14 15 15 Guide to use the Instruction Manual The following symbols will be found in the text to guide you through the instruction book Safety instructions Step by step instructions Environmental Information This appliance complies with the followings E.E.C. Directives: - 89/336 (Electromagnetic Compatibility Directive) -73/23 (Low Voltage Directive) -93/68 (General Directives) and subsequent modifications Description of the Appliance Installation Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. Installation Requirements Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas. The chimney hood must be installed according to the instructions suppliers below and by qualified and competent personnel to the relevant National Standards. This cooker hood is designed to be fixed to any horizontal surface over a cooking area, and can be used in the extraction (ducted to the outside) or recirculation mode. The installation work must be undertaken by a qualified and competent person. The manufacturer disclaims any responsibility for damage due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation. Unpacking ... Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton. The cooker hood is made up of the following components: Ref. Q.ty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 7.1 1 Telescopic frame complete with extractor, consisting of: 7.1a 1 Upper frame 7.1b 1 Lower frame 9 1 Reducer Flange o 150-120 mm 10 1 o120-125 Ducting flange 14 1 Recirculation extension ducting 14.1 2 Recirculation extension ducting 15 1 Recirculation spigot 24 1 Junction box 25 2 Pipe clamps Ref. Q.ty Installation Components 12c 6 Screws 2,9 x 9,5 12e 2 Screws 2,9 x 6,5 12f 4 Screws M6 x 10 21 1 Drilling template Q.ty Documentation 1 Instruction Manual .......................................................................................................... Installing the Cooker Hood In all cases where the ceiling is not strong enough at the suspension point, the installer must provide strengthening using suitable plates and backing pieces anchored to the structurally sound parts. Drilling the Ceiling/Support Shelf • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. • Place the drilling template 21 provided on the ceiling/ support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. • Mark the centre of the holes in the template. • Drill the holes at the points marked: • For concrete ceilings, drill for plugs appropriate to the screw size. • For hollow brick ceilings with wall thickness of 20 mm: drill o 10 mm (immediately insert the Dowels not provided). • For wooden beam ceilings, drill according to the wood screws used. • F...
Este manual também é adequado para os modelos :Fans - JLBIHD906 (592.86 kb)
Fans - JLBIHD906 (592.86 kb)
Fans - JLBIHD906 (592.86 kb)
Fans - JLBIHD906 (592.86 kb)