Log:
Assessments - 4, GPA: 4.5 ( )

Instruções de Operação Electrolux, Modelo DK 4360

Fabricante : Electrolux
Arquivo Tamanho: 2.99 mb
Arquivo Nome : 31408b6d-7f29-4e8d-a231-1ff1a450f722.pdf
Língua de Ensino: enfrdenl
Ir para baixar



Facilidade de uso


The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated ashousehold waste. Instead it shall be handed over to the applicablecollection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmentalregulations for waste disposal. For more detailed information about treatment, recovery and recyclingof this product, please contact your local city office, your householdwaste disposal service or the shop where you purchased the product. 54 Description of the Appliance • The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. • The hood is supplied as an extractor unit and can also be used with a recirculation mode by fitting a charcoal filter. Extraction mode • In this mode fumes are extracted to the outside via a hose connected to the coupling ring. Fig. 1 • In order to obtain the best performance the hose should have a diameter equal to the outlet hole. Recirculation mode • The air is filtered through a charcoal filter and returned to the kitchen. Fig. 2 • You will need an original charcoal filter for the recirculation mode. (See Special Accessories). Fig. 1 Top Rear Coupling ring Top Rear Fig. 2 Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. The control switches are located on the unit’s front panel: Light switch Speed 3 Speed 2 Motor switch Speed 1 • the light switch switches the hood lamp on and off • the motor switch switches the motor off • Speed 1: Speed 1 push-button • Speed 2: Speed 2 push-button • Speed 3: Speed 3 push-button Maintenance and Care Warning! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the connector and removing the connector fuse. Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket. Metal grease filter • The purpose of the grease filters is to absorb grease particles which form during cooking and it must always be used, either in the external extraction or internal re-circulation function. Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks. Removing the metal grease filters • Push it towards the back of the unit and then pull it down and out. Fig. 3. Hand washing Soak grease filters for about one hour in hot water with a grease- loosening cleaner, then rinse off thoroughly with hot water. Repeat the process if necessary. Refit the grease filters when they are dry. Dishwasher Place grease filters in the dishwasher. Select most powerful washing programme and highest temperature, at least 65°C. Repeat the process....

Este manual também é adequado para os modelos :
Fans - DK 4360 (2.99 mb)
Fans - DK 4390 (2.99 mb)
Fans - DK 4360 (2.99 mb)
Fans - DK 4390 (2.99 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias